yealink sip-t26p AutoProvision every 10 mins

[tommy]

yealink sip-t26p AutoProvision every 10 mins. I try Firmware 6.72.0.75,6.72.0.50 and 6.72.0.80, phone still provision every 10mins.


Sep 23 21:18:51 AUTP[344]: AUTP<6+info > RepeatPolicy:Post thread Msg(0x000A0000, 0, 0)
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > AutoProvision Begin >>>
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > Check Talklogic Status ...
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > Send Msg 0x30007 to app_vpPhone
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > *** [TASK:344] Lanuch Msg[XA0000]
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > Receive start AutoP
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > *** Launch Upgrade
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > *** Launch DHCP Upgrade
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > *** Launch Config URL Upgrade
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > network complete
Sep 23 21:18:51 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac]
Sep 23 21:18:51 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac]
Sep 23 21:18:51 AUTP[344]: AUTP<6+info > type = http,hostname = myprovisionserver, username = , psw = ******, port = -1
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > download file success!!
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Load M7
Sep 23 21:18:52 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac]
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > MD5 is same! Upgrade [bin|rom]
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > *** Upgrade BIN File
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > NAME: [ remote_phonebook.data.1.name ]
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Bin MD5 is same
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > *** END [NO CHANGE]
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Update Parse file Finished!
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Upgrade finished [OK]
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Send Upgrade end to GUI!
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Broad msg reboot = FALSE
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Autop Success, Close Redirect!
Sep 23 21:18:52 AUTP[344]: AUTP<6+info > Autoprovision End >>>


Sep 23 21:28:51 AUTP[344]: AUTP<6+info > RepeatPolicy:Post thread Msg(0x000A0000, 0, 0)
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > AutoProvision Begin >>>
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > Check Talklogic Status ...
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > Send Msg 0x30007 to app_vpPhone
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > *** [TASK:344] Lanuch Msg[XA0000]
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > Receive start AutoP
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > *** Launch Upgrade
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > *** Launch DHCP Upgrade
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > *** Launch Config URL Upgrade
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > network complete
Sep 23 21:28:51 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac]
Sep 23 21:28:51 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac]
Sep 23 21:28:51 AUTP[344]: AUTP<6+info > type = http,hostname = myprovisionserver, username = , psw = ******, port = -1
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > download file success!!
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Load M7
Sep 23 21:28:52 AUTP[344]: AUTP<4+warnin> Get device mac: [t26 mac]
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > MD5 is same! Upgrade [bin|rom]
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > *** Upgrade BIN File
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > NAME: [ remote_phonebook.data.1.name ]
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Bin MD5 is same
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > *** END [NO CHANGE]
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Update Parse file Finished!
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Upgrade finished [OK]
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Send Upgrade end to GUI!
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Broad msg reboot = FALSE
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Autop Success, Close Redirect!
Sep 23 21:28:52 AUTP[344]: AUTP<6+info > Autoprovision End >>>