Converting to Auto Provisioning

[Axion Communications]

(02-22-2013 01:19 AM)Mauro Wrote:  

(02-22-2013 01:11 AM)jtcary Wrote:  If you change the config file on the provisioning server, the phone pulls down the file, but does not apply the changes.

Any setting? Also the ringtone? So the same test that I did, has got a different result in your environment? I don't know... Do you have some phones with an old 6x firmware, to repeat the same test?

Please notice that 6x firmware phones do not support the new format (M7) autoprovisioning file, and that it is not possible to downgrade from 7x to 6x (I read that in some Yealink V70 documentation).

Considering that v 70 firmware supports both old and new autoprovisioning templates, you may repeat the test with the other one on a v70 phone.

Hi Mauro,

I'll test that and get back to you. Also we provisioning over ftp instead of tftp. That could make a difference because from what I can tell, the phone boots up, uses the existing local config, and then 5 seconds later I see it requesting the new config from the ftp server.