New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit :

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Converting to Auto Provisioning
Author Message
Axion Communications Offline
Junior Member

Posts: 16
Joined: Feb 2013
Reputation: 1
Post: #3
RE: Converting to Auto Provisioning
(02-20-2013 06:19 PM)Mauro Wrote:  AFAIK, autoprovisioning overrides only the settings that exist in the provisioning file. If you add them to your provisioning file, they should override those already existing on the phone; if some sections are missing in the provisioning file, they will not be modified on the phone.
I think however there are some settings that you cannot set at all by autoprovisioning, but only through web gui or directly on the phone (I think once I found a Yealink document with a table indicating which features is possible to configure through the three modes... take a look to phone support page on main site).

To have the phones start from "clean", you may tell people to hold "ok" button for 10 seconds, then press it again when the phone asks for "factory reset?". This way, all settings should return to their defaults, also those that cannot be set through autoprovisioning. Then the phone will download and apply the autoprovisioning settings.

Thank you so much. That was what I was expecting, but that is not what's happening. Here are the exact steps we're following. This issue is happening with both the T26's (firmware and T38's (firmware

Take a phone that has been manually provisioned then plug it into a network that has auto provisioning working. I can see in the ftp server logs that the phones download the configuration files, but the phone only updates values that were not manually specified.

If you take the same phone, reset it to default, then plug it into the network then it auto provisions correctly. This is an issue for use because we have dozens of remote locations and home users that don't have access to a local tftp server.

We need to be able to change phone settings without requiring the user to reset the phone, and then manually entering the auto provisioning information. Is that possible?
02-21-2013 08:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Converting to Auto Provisioning - jtcary - 02-20-2013, 07:55 AM
RE: Converting to Auto Provisioning - jtcary - 02-21-2013 08:12 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Auto provisioning seams to be (partly) broken in version 83 for T46G HaraldL 2 2,260 07-02-2019 03:04 PM
Last Post: Fraukas2
Lightbulb Auto provision firmware ... Yuriy Y. 1 1,370 04-26-2019 05:40 AM
Last Post: Yuriy Y.
  Provisioning Multiple Wallpapers BryanLee 1 1,312 04-24-2019 08:39 PM
Last Post: joew
  T23G won't donwload y000000000044.cfg from Provisioning Server rsardinha 3 1,518 04-12-2019 06:13 PM
Last Post: rsardinha
  T22P always auto restart jamess2007 2 1,426 03-13-2019 11:49 AM
Last Post: Langveldt
  Firewall Settings for Auto Provisioning ChristophWHAT 2 2,182 02-04-2019 12:47 PM
Last Post: ChristophWHAT
  Multiple provisioning servers Integra Business Solutions Inc. 4 2,311 10-26-2018 06:49 PM
Last Post: Integra Business Solutions Inc.
  Auto Provisioning Hangs Rus 1 1,590 10-17-2018 11:06 AM
Last Post: Rus
  Auto provisioning file names shane.caznet 1 2,008 10-12-2018 02:56 PM
Last Post: jolouis
  Auto-Provision Firmware Rus 0 1,330 08-24-2018 11:07 AM
Last Post: Rus

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication