[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MWI not working
Author Message
arcinsurance Offline
Junior Member
**

Posts: 8
Joined: Dec 2012
Reputation: 0
Post: #2
Information RE: MWI not working
(02-16-2013 05:42 AM)kmccracken Wrote:  I'm using Asterisk v11.2.1, and several Yealink T38G's. I'm using the phone's mac address as it's sip account name. I dial *97 to get to the voicemail system. I haven't been able to get the Message Waiting Indicator to work. I'm not sure what settings need to be made. Here's what I have so far:

In sip.conf, I have:
[general]
mwi_from=asterisk
[template](!)
type=friend
context=internal
host=dynamic
disallow=all
allow=ulaw
allow=g729
allowsubscribe=yes
dtmfmode=rfc2833
sectret=<removed>
callcounter=yes
subscribecontext=extensions

[0015653fabcd](template)
mailbox=111

In my voicemail.conf file:
pollmailboxes=yes
[mycompany]
111 => 0000,Test User

On the T38, I have:
Subscribe for MWI=enabled
SubscribeMWIToVM=enabled

Obviously I'm missing something somewhere. Is there a guide that shows what settings should be set on the phone & in Asterisk to get the MWI to work? Or could someone provide some direction?

I've seen reference to different settings in Account | Basic | "Voice Mail". I'm not sure if it should be *97 (which is what I use to dial the voicemail server), or 111 (which is the extension), or 0015653fabcd (the mac address of the given phone). Also, I've tried enabling "Use user=phone" under Account | Advanced on the T38, but none of those got this working.

Any help will be much appreciated.
Thank you.

Hi,
I'm using FreePBX and I have a problem with the MWI when the mailbox=ext#@device rather than ext#@default in my extension settings page of the FreePBX admin page. I'm not sure what that ties back to in terms of config files because I rarely need to adjust them manually.
(This post was last modified: 02-27-2013 03:14 AM by arcinsurance.)
02-27-2013 03:13 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
MWI not working - kmccracken - 02-16-2013, 05:42 AM
RE: MWI not working - arcinsurance - 02-27-2013 03:13 AM
RE: MWI not working - kmccracken - 02-27-2013, 03:58 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  No IP address for W60 but T42 working ok heathb 2 3,923 03-09-2022 05:11 PM
Last Post: complex1
  DHCP not working on T26P when OpenVPN is enabled. LandonL 11 35,947 05-12-2021 10:46 AM
Last Post: 1sae
  MWI not working with Fritzbox frappy 0 3,897 10-05-2020 08:34 PM
Last Post: frappy
Sad T41P BLF ligth not working goHelpDesk.com 2 9,830 10-15-2016 02:10 AM
Last Post: CWR
  NTP not working pio007 1 8,741 11-03-2015 05:05 AM
Last Post: pio007
  OpenVPN not working on T26P jjesson0503 3 11,248 08-22-2015 11:23 AM
Last Post: James_Yealink
  T41P BLF not working steven.kst 1 7,637 08-12-2015 03:56 PM
Last Post: Yealink_Michael
  T26 Distinctive Ring not working jason.fell@classtelecom.co.uk 1 7,569 07-23-2015 07:16 PM
Last Post: James_Yealink
  DSS key DTMF not working anymore IPnexia 1 8,229 05-29-2015 05:59 PM
Last Post: Elaine_Yealink
  Yealink T28p no longer working after CudaTel firmware update AshElsayid 1 9,158 01-20-2015 08:52 PM
Last Post: James_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication