[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
32.70.1.11, puts call on hold instead of tranfer - Solved
Author Message
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #7
RE: 32.70.1.11, puts call on hold instead of tranfer
I worked on the problem all weekend and found the solution, it wasn't with the phones receiving the call but sending the call.

3cx does not support semi attended transfer mode. I changed my provision template and all of the calls seem to be working. From what I can tell, if the person transferring the call would hit the transfer button dial the ext, then wait till the phone rang and then hung up or hit the transfer button again. It will put the phone call on hold till the call was answered and 3cx wouldn't treat this as a new call. If they hit the 2nd transfer before the 2nd phone rang it would treat it as a transfer and it would work properly.

Disabling the semi attended transfer mode and they can still do attended transfers and blind transfers without issue.





#Enable or disable the transferee to display the missed call prompt when receiving a semi_attended transfer call;
#0-Disabled, 1-Enabled (default);
transfer.semi_attend_tran_enable = 0

#Enable or disable the phone to complete the blind or attended transfer through on-hook;
#0-Disabled,1-Enabled(default);
transfer.blind_tran_on_hook_enable = 1
transfer.on_hook_trans_enable = 1

#Define the way of DSS key when configuring as a transfer key; 0-Display Number, 1-Attended Transfer, 2-Blind Transfer (default);
transfer.dsskey_deal_type = 2

#Enable or disable the phone to enter the transfer to interface during two calls when pressing the transfer soft key or TRAN key; 0-Disable, 1-Enabled (default);
transfer.multi_call_trans_enable =

#Enable or disable the conference initiator to transfer the call when hanging up;
#0-Disabled(default),1-Enabled;
transfer.tran_others_after_conf_enable =
10-22-2014 09:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: 32.70.1.11, puts call on hold instead of tranfer - jasit - 10-22-2014 09:45 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T31, call history, delete old records sles 3 810 01-12-2024 01:33 PM
Last Post: sles
  T30 peer-2-peer call mikrob 2 917 12-10-2023 02:01 AM
Last Post: mikrob
  Dialog-Info Call Pickup Greysi 6 34,080 10-31-2018 03:54 PM
Last Post: cleviton
  Call Park Pickup different with T3x and T2x vondie 21 78,947 01-09-2018 04:45 PM
Last Post: vondie
  TLS - Unauthorized Response To INVITE halts call on TLS close [SOLVED] kg4ysy 10 36,496 06-24-2015 11:11 PM
Last Post: kg4ysy
  T38 Call Park, BLF light stays red mdctech 1 9,850 12-05-2014 07:51 PM
Last Post: Wilson_Yealink
  Action URI to hangup call on T3x V70 W3TEL_Support 8 31,425 10-16-2014 08:22 PM
Last Post: Wilson_Yealink
  Yealink T38G Transfer Calls while on Hold mdctech 4 17,374 10-13-2014 02:53 PM
Last Post: Yealink_Jim
  T38G call back not work tlc 1 9,742 09-01-2014 08:40 PM
Last Post: Wilson_Yealink
  Name column in call list Ruben 1 8,897 09-01-2014 08:28 PM
Last Post: Wilson_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication