I am using
T46G
Firmware Version 28.72.0.37
Hardware Version 28.2.0.128.0.0.0
Before config
linekey.4.line = 0
linekey.4.value =http://ix-pbx.inolex.com:88/applications.php/voicemail/main?user=1532
linekey.4.extension = **
linekey.4.type = 27
linekey.4.label = Visual VM
linekey.5.line = 0
linekey.5.value =
linekey.5.extension = **
linekey.5.type = 27
linekey.5.label =
After Config
linekey.3.label = Park
linekey.4.line =
linekey.4.value =
linekey.4.extension = **
linekey.4.type =
linekey.4.label =
linekey.5.line = 0
linekey.5.value =
http://ix-pbx.inolex.com:88/applications...?user=1532
linekey.5.extension = **
linekey.5.type = 27
linekey.5.label = Visual VM
Once i load the latest config and reboot the phone
both button 4 and 5 are showing and only if factory default the phone that is will list all the button correctly.
Feel like some how the phone are last config when it reboot and only erase them when i am factory default them
(08-16-2014 12:16 PM)Yealink Support Wrote: Hi Paulhuynh,
The issue you mentioned is that:You wanted to remove the config on key 3 and move it to key 4 via Auto Provisioning ,right?
I don’t know which phone you used ,so I tested T42G in my side.
Let me show you the syntaxes in AutoP file below:
(for example,I remove the config on key 3 ,then set the type of key 4 to Speed Dial and its value=d)
##########################################
## Line Key ##
##########################################
###linekey.X.line =
###linekey.X.value =
###linekey.X.pickup_value =
###linekey.X.type =
###linekey.X.xml_phonebook =
###linekey.X.label =
1.If you want to remove both type and value of key3.
linekey.3.type = 0 (0=N/A)
linekey.4.value = d
linekey.4.type = 13 (13=Speed Dial)
After the auto provisioning process is completed, the key 3 is blank and the key 4 is setted to Speed Dial and the value is “d”.
2.If you want to remove the value of key 3 only.
linekey.3.type =13(13=Speed Dial)
linekey.3.value = %NULL%.
linekey.4.value = d
linekey.4.type = 13 (13=Speed Dial)
After the auto provisioning process is completed, the type of DSS key 3 will be Speed Dial ,and its value is empty. The key 4 is setted to Speed Dial and the value is “d”.
Note: If you want to reset the configuration of a parameter, set the value of the parameter to %NULL%.
And you can refer to AutoP guide for detail.
Thanks