T22P connect to TFTP server but not able to take data from the cnf file..

[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Thread Rating:

0 Votes - 0 Average
1
2
3
4
5

Threaded Mode \| Linear Mode T22P connect to TFTP server but not able to take data from the cnf file..
Author	Message

Yealink Support Offline

Administrator

Posts: 2,683

Joined: Dec 2012

Reputation: 25

Post: #4

RE: T22P connect to TFTP server but not able to take data from the cnf file..

yes, you can set the static ip address via autop, the sentences are:

Code:

network.internet_port.type = 

network.internet_port.ip =

network.internet_port.mask = 

network.internet_port.gateway =

network.primary_dns= 

network.secondary_dns =

About the corresponding parameters, please refer to the autop guide. Begin page at 81.

Auto_Provisioning_Guide

08-20-2014 10:41 AM

« Next Oldest | Next Newest »

Messages In This Thread

T22P connect to TFTP server but not able to take data from the cnf file.. - Shahper - 08-13-2014, 10:55 PM

RE: T22P connect to TFTP server but not able to take data from the cnf file.. - Yealink Support - 08-16-2014, 10:48 AM

RE: T22P connect to TFTP server but not able to take data from the cnf file.. - Shahper - 08-18-2014, 03:13 PM

RE: T22P connect to TFTP server but not able to take data from the cnf file.. - Yealink Support - 08-20-2014 10:41 AM

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Disable/Change DND button on T22P	deoren	1	16,036	09-24-2013 04:00 PM Last Post: Yealink Support

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Log in