T4xG no OpenVPN IP when using TAP

[Output101]

Even if I don't force all traffic to go through the gateway, the tap0 device says it is open but never appears.

Code:

Aug 31 20:20:38 openvpn[747]: IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA.  OpenVPN 2.0-beta16 and earlier used 5000 as the default port.
Aug 31 20:20:38 openvpn[747]: NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Aug 31 20:20:38 openvpn[747]: Re-using SSL/TLS context
Aug 31 20:20:38 openvpn[747]: LZO compression initialized
Aug 31 20:20:38 openvpn[747]: UDPv4 link local (bound): [undef]:1194
Aug 31 20:20:38 openvpn[747]: UDPv4 link remote: 192.168.0.133:1194
Aug 31 20:20:40 openvpn[747]: [pfsense] Peer Connection Initiated with 192.168.0.133:1194
Aug 31 20:20:41 ATP [522]: ATP <3+error > Call fail
Aug 31 20:20:42 openvpn[747]: TUN/TAP device tap0 opened
Aug 31 20:20:42 openvpn[747]: Initialization Sequence Completed
Aug 31 20:20:42 openvpn[747]: Link success --init.c, 1138----

...

Code:

Aug 31 20:21:11 ATP [522]: ATP <3+error > http to file failed, code = -3, msg = Connect Failed, retry = 3
eth0      Link encap:Ethernet  HWaddr 00:15:65:9C:68:6C  
          inet addr:192.168.0.102  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::215:65ff:fe9c:686c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1903 errors:0 dropped:0 overruns:0 frame:0
          TX packets:201 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1024
          RX bytes:340629 (332.6 KiB)  TX bytes:85871 (83.8 KiB)
          Interrupt:8

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

  PID USER       VSZ STAT COMMAND
    1 root      2064 S    init