[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T28P / v2.70.0.130 Firmware - BLF Not Working
Author Message
SupermanSC Offline
Junior Member
**

Posts: 3
Joined: Jan 2013
Reputation: 0
Post: #3
RE: T28P / v2.70.0.130 Firmware - BLF Not Working
Your scenario is correct, however I will expand on this further. For our test environment on V70 code, we have 5 T28P phones configured on a FreeSwitch-based system. Incoming/outgoing calls work great. We've programmed the first 5 Memory/DSS Keys the same on all 5 phones - we want to show all 5 users statuses on all 5 phones.

This issue happens constantly - we have yet to get BLF working in this environment. We do not have any V61 phones to test this with as we're focused on building our system to support the V70 code. That said, it works fine on Polycom IP phones.

Prior to leaving the office yesterday, I reboot all phones and all the Memory/DSS keys on all phones were not lit. When I got in today, here is how they are lit:

Phone 1: All 5 DSS Lights are green. If I dial out on Phone 2, 3, 4, or 5, none of these lights will change to red.

Phone 2: Slot 1, 2 & 5 DSS Lights are Green. Dialing out on any of the phones does not change any of the BLF's red.

Phone 3: Slot 1, 2 & 5 DSS Lights are Green. Dialing out on any of the phones does not change any of the BLF's red.

Phone 4: Slot 1 & 5 DSS Lights are Green. Dialing out on any of the phones does not change any of the BLF's red.

Phone 5: Slot 1 & 5 DSS Lights are Green. Dialing out on any of the phones does not change any of the BLF's red.

All of these phones have identical configurations with the exception of these values changing:

account.1.label =
account.1.display_name =
account.1.user_name =
account.1.auth_name =
account.1.password =

I am PM'ing you the PCAP files for v70 firmware. As I stated earlier, I do not have v61 firmware.

How can I send you the PCAP file? It won't let me add an attachment to a PM from what I can tell.
(This post was last modified: 02-01-2013 03:36 AM by SupermanSC.)
02-01-2013 02:51 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T28P / v2.70.0.130 Firmware - BLF Not Working - SupermanSC - 02-01-2013 02:51 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T21P E2 firmware upgrade janp 0 514 01-27-2024 02:43 AM
Last Post: janp
  T28P - OpenVPN TLS error: Unsupported protocol 1sae 0 889 07-18-2023 06:50 AM
Last Post: 1sae
  Firmware upgrade fails on T21P E2 p.pasquino@technology4you.it 0 5,101 11-02-2021 04:42 PM
Last Post: p.pasquino@technology4you.it
  T21P_E2 firmware 84.0.125 slow with VLAN GwenH 3 12,005 11-03-2020 11:01 PM
Last Post: complex1
  T26P Can not upgrade firmware martien.poels@bank2loyalty.com 2 9,414 09-21-2020 05:16 PM
Last Post: complex1
  T28P foward call doesn´t work with 2.73.0.50 Tato 4 11,482 09-14-2020 03:49 PM
Last Post: complex1
Lightbulb Yealink T28P Firmware Upgrade Fails Michelth 11 54,693 06-27-2020 10:13 AM
Last Post: complex1
  T28P LDAP Problem oguzhan 1 7,681 06-10-2020 01:14 PM
Last Post: beldimon
  default username/password not working after firmware upgrade tfrohling 3 37,468 02-15-2020 01:30 PM
Last Post: khalidnisar
  Attended transfer not working T29G chysky@slany.cz 1 6,244 02-11-2020 02:48 PM
Last Post: chysky@slany.cz

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication