New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit :

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G - Voice VLAN - 3cx - HP 4500G switch
Author Message
jholcombe Offline
Junior Member

Posts: 22
Joined: Jul 2014
Reputation: 0
Post: #2
RE: T46G - Voice VLAN - 3cx - HP 4500G switch
Update: I have found that if I configure the port speed of the 4500G switch, or change the duplex, the phone will start responding (using the older firmware on the default VLAN), but the phone still won't respond on the correct VLAN. I changed the speed and duplex in the phone to 100-full, and set the switch to 100-full, however The T46G still doesn't reply on boot. On the switch, if I change the port speed or duplex once the T46G has booted, it will start to respond.

Perhaps there's an auto-negotiation issue on the port speed or duplex with Yealink Gigabit phones and certain switches? It's strange that it will start responding once I manually configure the switch port with a hard-coded duplex and speed (regardless of the phones duplex and speed setting).

Upgrading the firmware on the T46G to seems to help with the port auto-negotiation issues. However, I still have the problem with the phone not wanting to work on vlan 122. Now the phone is just not joining vlan 122 at all. It's getting an IP on the default vlan and not ever switching to vlan 122. I've set the vlan both in the phone config and DHCP option.
(This post was last modified: 07-16-2014 07:02 AM by jholcombe.)
07-16-2014 06:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
RE: T46G - Voice VLAN - 3cx - HP 4500G switch - jholcombe - 07-16-2014 06:30 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Versions (T46G) sfrazier 2 140 01-08-2020 10:08 PM
Last Post: jolouis
  Possible to have T27P switch back to first page of DSS Keys after a period of time? Bobcat19 2 2,886 11-13-2019 07:37 AM
Last Post: Ajani_Exetel
  Voice barely audible during incoming call Chris708 7 2,889 04-29-2019 01:31 PM
Last Post: Chris708
  IP Phone acquire untagged VLAN IP instead of tagged VLAN f.pancani 2 3,585 04-21-2018 07:49 AM
Last Post: Johnny88
  VLAN bug Kevin3 0 1,080 02-16-2018 05:37 PM
Last Post: Kevin3
Question How to optimize T46G? kubi 2 2,654 02-05-2018 02:48 PM
Last Post: Sbo
  my voice vlan can not recieve ip from microsoft dhcp server salar 1 2,436 06-23-2017 06:47 AM
Last Post: Kevin_Yealink
  Switch between active accounts speedy 2 4,848 06-22-2017 01:11 PM
Last Post: Fraukas2
  dhcp vlan option 132 - works without settings visible in UI dywilson 2 4,696 06-22-2017 12:48 PM
Last Post: salar
Bug T46G Configure key to operate as a VTR key? Will Redmond 5 5,364 05-20-2017 01:23 AM
Last Post: Kevin_Yealink

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication