Multicast Paging force speaker

[jolouis]

Hi Kevin,

Currently we have the paging priority set low so that it does not interrupt calls.

Right now she has resorted to doing what you suggested, turning the headset mode on and off constantly so that she is only using the headset when actually talking. (i.e. phone is in handset mode, starts ringing, she reaches over and presses headset mode then presses button on her headset to answer the call. When done she hangs up call from the headset then presses the headset mode button to put phone back to normal). It functions but is a lot of work for her to constantly be turning headset mode on and off, and very much defeats the point of being able to answer calls from her wireless headset since she has to be in front of the phone all the time!

The only other way to get the functionality needed would be to give her a stand alone headset that gets wired through the handset port and has one of those old "lifter" things. That would be very ugly and archaic though, so trying to avoid that situation.

Thanks!

-Rob