[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T28P & T38G: Speed Dial delay or pause between DTMF
Author Message
Larry@suntelnetworks.com Offline
Junior Member
**

Posts: 2
Joined: Apr 2014
Reputation: 0
Post: #28
RE: T28P & T38G: Speed Dial delay or pause between DTMF
(04-09-2014 05:46 PM)Yealink Support Wrote:  Hi all,

I have re-submitted to our product department for evaluating.

Hello,
I have always been able to add a Pause on Polycom and Cisco phones by simply placing a comma " , " after the phone number, each comma equals one 3 second pause. Sometimes I will enter three or four Commas to obtain a longer pause to get through an Auto Attendant, then enter the extension number or PIN Code.
I have been provisioning Hosted PBX for longer most anyone (2001) and have used all makes and models phones on just about every type of switch you can imagine.
You should able to enter a Pause, and this is most important when calling numbers which then require long PIN numbers.
Thank you.

Hello,
I have always been able to add a Pause on Polycom and Cisco phones by simply placing a comma " , " after the phone number, each comma equals one 3 second pause. Sometimes I will enter three or four Commas to obtain a longer pause to get through an Auto Attendant, then enter the extension number or PIN Code.
I have been provisioning Hosted PBX for longer most anyone (2001) and have used all makes and models phones on just about every type of switch you can imagine.
You should able to enter a Pause, and this is most important when calling numbers which then require long PIN numbers.
Thank you.
(This post was last modified: 04-01-2015 06:56 AM by Larry@suntelnetworks.com.)
04-01-2015 06:55 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T28P & T38G: Speed Dial delay or pause between DTMF - anonymous1718628087441 - 04-29-2014, 08:44 AM
RE: T28P & T38G: Speed Dial delay or pause between DTMF - Larry@suntelnetworks.com - 04-01-2015 06:55 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  set number key as speed dial key not working timotel 1 1,942 08-27-2024 04:18 AM
Last Post: Yisroel_MongoTEL
  FreePBX chan_pjsip DTMF digits not displaying on screen karl_edgeconnect 1 1,529 02-13-2024 09:52 PM
Last Post: karl_edgeconnect
  Audio Delay - Disable Jitter Buffer? joni1802 4 4,647 07-17-2023 10:20 PM
Last Post: complex1
  MP54 Handset - Auto Dial on handset pickup/Off Hook TheGarrison 5 9,660 09-16-2022 03:04 AM
Last Post: imgibason
  Click to dial from web browser h2g-vaka 7 18,571 06-10-2022 03:27 AM
Last Post: troy44
  Dial Shortcut from Directory customvoip 0 3,226 09-29-2021 05:46 AM
Last Post: customvoip
  T28p - Firmware version advice Tato 2 15,980 09-11-2020 01:04 PM
Last Post: Tato
Brick Yealink t29G | 5 seconds ring delay amichy 2 11,069 08-31-2020 11:08 PM
Last Post: gmanual
  Slow speed on the PC port Sur 4 18,240 04-12-2019 09:28 AM
Last Post: Johnny88
  Dial from Windows Pox 0 4,988 11-06-2018 02:52 PM
Last Post: Pox

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication