RD button doesn't process Dialplan

[Wilson_Yealink]

Hi sbeu,

Sorry for the delay. I have tested your dialplan in my side. It does work well.
In your dialplan, it means if you dial a number which length is more than 4 digits, the phone will add 0 in the number begin.
But you pree the dial button, the phone will dial the number from history. And if that number length is more than 4 digits, it also will add 0 in that number begin.
For example, when you dial 1234, the phone will dial 01234 finally.
when you press RD button to dial 01234 from history, before you add the dial plan, it will dial 01234.
But after you add dial plan, it will dial 001234 actually.

For more info about it, plese refer to the admin guide. Begin on page 67.

admin guide