[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48 BLF
Author Message
support@thearcehouse.com Offline
Junior Member
**

Posts: 8
Joined: Apr 2014
Reputation: 0
Post: #3
RE: T48 BLF
Sorry for the late response. It works very well.

(06-27-2014 02:04 PM)Yealink Support Wrote:  Hi support@thearcehouse.com,

If you want set blf of line1, the code should be like that.

Code:
linekey.1.line = 1
linekey.1.value = 121
linekey.1.pickup_value =
linekey.1.type = 16
linekey.1.label = Sergio
linekey.1.extension =

Note: if you want to pickup the monitored number(121), you should add the
linekey.1.pickup_value = "the pickup code". Gennerally, it is *20* in the 3CX PBX. If not, you should ask your network administrator or PBX server provider for help.
Best regards
07-12-2014 02:27 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T48 BLF - support@thearcehouse.com - 06-27-2014, 01:13 AM
RE: T48 BLF - Yealink Support - 06-27-2014, 02:04 PM
RE: T48 BLF - support@thearcehouse.com - 07-12-2014 02:27 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication