[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Handsets not ringing for incoming calls
Author Message
justin.rampy@ringcentral.com Offline
Junior Member
**

Posts: 2
Joined: Nov 2014
Reputation: 0
Post: #17
RE: Handsets not ringing for incoming calls
I work for a cloud hosted PBX provider and we recently started selling the Yealink W52P with multiple handsets. I have a customer with the same issue using 4 handsets and have loaded the latest available firmware for both the base and the handsets as follows:
Base Firmware: 25.73.0.22
Handset Firmware: 26.73.0.12

The jury is out so far with my customer as we did this upgrade on 11-14-2014 and today is 11-17-2014. However, I can tell you from my lab phone using 3 handsets and the same above firmware loads, I have replicated the following results:
Result 1: Handset 1 did not ring on the first ring cadence but starting ringing in sequence with the other 2 handsets on the second ring cadence.

Result 2: Handset 3 did not ring for the first 2 ring cadences but then started ringing in sequence with the other 2 handsets on the third ring cadence.

I don't believe this to be environmental in nature as I can replicate these results no matter how far the handsets are from the base unit. I recommend that everyone with this issue validate if the handsets start ringing after a certain number of ring cadences. This has been my experience with this latest firmware, all the handsets will start ringing after 1 or more ring cadences. If that is also your experience, it is important to include that detail in the problem description. I would call this an intermittent "delayed ringing" of all handsets. If the handset(s) in question truly do not ring at all, that is different than what I am able to reproduce. Either way, this is definitely between the base unit and the handsets.
11-18-2014 08:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Handsets not ringing for incoming calls - justin.rampy@ringcentral.com - 11-18-2014 08:34 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P 2 handsets DAZZLING 1 6,945 06-01-2021 09:55 PM
Last Post: complex1
  Slow to ring on incoming call rodcrux 1 7,717 01-25-2021 07:10 PM
Last Post: complex1
  Handheld does not receive incoming calls dunzi 3 10,097 12-02-2020 10:41 PM
Last Post: complex1
  Reconfig of branded handsets/bases BestGear 3 9,956 10-11-2020 04:57 PM
Last Post: BestGear
  Phone only ringing after reboot- quickly stops working AE 4 14,175 09-03-2018 02:08 AM
Last Post: okulhealth
  Cannot transfer incoming calls EverythingVoice 0 5,268 06-19-2018 10:36 AM
Last Post: EverythingVoice
  Incoming call ringing on another accounts phone Playboater 0 4,837 05-26-2018 09:38 PM
Last Post: Playboater
  cannot transfer calls to every W52H handheld Basylnk 1 7,695 04-23-2018 07:21 AM
Last Post: anonymous1711612242218
  W52P won't make outgoing calls Little Assynt 7 34,077 02-05-2018 07:07 AM
Last Post: Evan_Yealink
  How to blacklist incoming call number? Michaelawertyuiol 12 31,112 01-11-2018 08:17 AM
Last Post: Aishion_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication