New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Enable Forwarding through Action URI?
Author Message
Rayfield Offline
Junior Member
**

Posts: 12
Joined: Dec 2012
Reputation: 0
Post: #1
Enable Forwarding through Action URI?
I have customers who have T28P's with 3CX PBX's. I need to be able to allow these customers to easily use No-Answer Call Forwarding. Specifically, they need to be able to easily enter the number to which the phone should forward when enabling No-Answer Call Forwarding. So far, I have found no easy way to do this in 3CX. Of course, it can be done in the T28P through the Menu on the phone, but that's not very 'easy' for some users to do.

Some older documentation that I have indicates that this can be set on T3X phones through an Action URI. I tried this on my T28P and it did not work, but I may not have the correct 'syntax' for doing this on a T28P.

Can this be done on a T28P and if so, what is the correct syntax for the URL to send to the phone?

John Rayfield, Jr.
Rayfield Communication
06-14-2014 02:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Enable Forwarding through Action URI? - JRayfield - 06-14-2014 02:15 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T22P Action URI ATrans and BTrans not working? DaveThompson 2 2,852 09-10-2019 10:47 AM
Last Post: DaveThompson
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 7 7,606 08-03-2018 08:03 PM
Last Post: MarkLReed
  T26P Action Urls not triggering after update ubc 0 2,418 05-02-2016 12:49 PM
Last Post: ubc
  T29G + Broadworks + Call Forwarding Issue jtwiggs 1 2,776 03-11-2016 09:23 PM
Last Post: jtwiggs
  Call Forwarding SIP devices YEALINK CISCO CALL MANAGER loperajr 1 4,341 01-08-2016 05:48 AM
Last Post: Karl_Yealink
  Failover and register on enable config jmpg 3 4,276 10-27-2015 08:55 PM
Last Post: jmpg
  action url Henri Elspass 5 11,177 11-19-2014 06:06 AM
Last Post: ModCraig
  T26P Action URI format tiziano 1 4,204 10-23-2014 02:33 PM
Last Post: Wilson_Yealink
Question T20P: Action URL, does it reboots on Register Failed? ruiseixas 6 14,009 03-05-2014 05:43 AM
Last Post: ruiseixas
  T20 Action URI doesn1t work FW 9.70.0.168 Ednaldo 1 4,531 11-12-2013 11:30 AM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication