[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Direct Call Pickup Codes
Author Message
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #11
RE: Direct Call Pickup Codes
I see this in their manual:
Code:
How to use Remote Pickup
To pickup an incoming call from another phone, simply dial ** and then either the Short Code
(similar to extension number) or the MyNetFone number of the phone that you want to pick up
the call from.
For example: Phone ‘A’ has a Short Code of 2000 and a MyNetFone Number of 09001234.
If Phone ‘A’ receives an incoming call, you can remotely pick it up from any phone on the
same Virtual PBX account by dialing either **2000 or **09001234.

So with a T46 - I would just make a DSS Key for each extension as the pickup - maybe like a Speed Dial.
Label is what shows on the screen, value would be **<number as above>

Perhaps also try setting Direct Call Pickup value to ** and Create a BLF DSS Key for the extension. The BLF Value is the ShortCode. The Label is the persons Name, the extension is their extension.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 06-12-2014 07:25 AM by CWR.)
06-12-2014 07:20 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Direct Call Pickup Codes - AvantGarde - 06-04-2014, 11:31 AM
RE: Direct Call Pickup Codes - CWR - 06-04-2014, 12:57 PM
RE: Direct Call Pickup Codes - AvantGarde - 06-04-2014, 01:10 PM
RE: Direct Call Pickup Codes - AvantGarde - 06-05-2014, 01:10 PM
RE: Direct Call Pickup Codes - AvantGarde - 06-10-2014, 06:31 AM
RE: Direct Call Pickup Codes - AvantGarde - 06-11-2014, 07:22 AM
RE: Direct Call Pickup Codes - AvantGarde - 06-12-2014, 06:14 AM
RE: Direct Call Pickup Codes - CWR - 06-12-2014 07:20 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  LDAP directory during call transfers aciacci 0 33 06-20-2024 11:19 PM
Last Post: aciacci
  [Post info updated] Always ask where the call forwarding goes ivan2808 0 453 04-10-2024 10:16 PM
Last Post: ivan2808
  permisson to Call list on t46S ist denied wolfi30 1 764 03-04-2024 02:08 PM
Last Post: wolfi30
  permission denied to call list wolfi30 0 580 02-23-2024 08:54 PM
Last Post: wolfi30
  MP54 Call Forwarding pureit2018 0 893 11-23-2023 07:58 AM
Last Post: pureit2018
  Enhanced DSS Key - Conference Call joe1st 0 811 11-11-2023 05:27 AM
Last Post: joe1st
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 965 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 89,567 10-18-2023 12:59 PM
Last Post: sles
  Display 0 for line pickup SupportA 0 1,420 07-12-2023 08:51 PM
Last Post: SupportA
  Picking up a call does not display Caller's Name oliv 0 1,611 04-19-2023 04:25 PM
Last Post: oliv

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication