Autoprovisioning on Startup

[Yealink Support]

(01-25-2013 09:52 PM)Chantry Wrote:  The firmware version is 6.70.0.111.

I realize the phone is supposed to update if the file has not been changed, but it doesn't seem to want to do it. What is currently happening is it will start up and say "Update Skipped" regardless of what I do to the config files. If I then go onto the phone web portal and force an auto provision, it will do the provision after a delay of about 30 seconds to a minute. When it does provision it loads the settings correctly, so it is working when I get it to provision,

Maybe there is a bug with the particular firmware version?

---

Also, could someone forward me to the documentation on customizing soft keys? I'd like to be able to do it from the .cfg file.

Hi,
yes, the firmware 6.70.0.111 is the RPS firmware ,but it is not the latest firmware, you can download the latest firmware 6.70.0.130(without RPS) from below link,
http://www.yealink.com/SupportDownloadfi...5&flag=142
and you can download the RPS firmware 6.70.0.131 from below link,
ftp://yealinkftp:yealinkftp@ftp.yealink.....0.131.rom

Please download the auto provision template file Yealink T2XP-T3XG-VP530 phones Auto Provisioning User Guide Rev_70.0 from below link, then you can refer to how to configure the soft key.
http://www.yealink.com/SupportDownloadfi...5&flag=142

Best Regards!
Yealink Support Team