[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Autoprovisioning on Startup
Author Message
Yealink Support Offline

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Autoprovisioning on Startup
(01-19-2013 01:03 AM)Chantry Wrote:  Using a YeaLink 26 and I have been trying to get auto provisioning to work on start up.

I followed the documentation as closely as possible. However, when I start up the phone it always gives a "Skipped Update" message. The only way I have been successful at provisioning is going to the web portal and clicking Auto Provision Now then waiting an unpredictable amount of time, where the phone will just decide to update out of the blue.

The settings I have in the config files are as follows.

[ autop_mode ]
path = /config/Setting/autop.cfg
mode = 1
schedule_min =
schedule_time =
schedule_time_end =
schedule_dayofweek =


[ autoprovision ]
path = /config/Setting/autop.cfg
server_address = http://***********.ca/prov/yealink/
user =
password =

Any suggestions? Attached are the relevant portal settings.

Hi ,
Could you please let us konw which firmware of the phone ?
From you mentioned, it seems you use the RPS firmware, when use the RPS firmware, when first reboot,it will show “Sending Provision Requests …”
• if the phone can’t obtain the auto provisioning address for auto-provisioning , the phone will show “Update Skipped” , the duration will last 15s. and then back to the idle .
• Once the phone auto- provisioning successfully no matter through RPS or common auto-provisioning , if you reboot the phone , the initializing will the same as the common firmware .

I have checked the attached file, and find you chose the auto provision mode as power on + repeatedly , and the interval time is 1 minutes , it means the phone will detect the auto provision file when it power on and every 1 minutes.
If the phone do auto provision once , it will download the auto provison every minutes ,but if the auto provision file is not changed, it will detect the MD5 is the same, it will not do auto provision .
if you change the auto provision file, the phone will do auto provision .

Yealink Support Team
01-19-2013 11:55 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Autoprovisioning on Startup - Chantry - 01-19-2013, 01:03 AM
RE: Autoprovisioning on Startup - Yealink Support - 01-19-2013 11:55 AM
RE: Autoprovisioning on Startup - Chantry - 01-25-2013, 09:52 PM
RE: Autoprovisioning on Startup - deepanvi - 02-22-2013, 05:53 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Provisioning only works on startup Snapdragons 3 7,696 09-29-2020 12:49 AM
Last Post: Jay_Yealink
  Autoprovisioning different firmware phone SimoneAlceo 3 8,827 07-11-2020 12:00 PM
Last Post: complex1
  Autoprovisioning for SIP-T21 V.83 - common sip server name econnet 0 3,658 07-24-2018 03:58 PM
Last Post: econnet
  [SOLVED] T48S AutoProvisioning ldap.host not used BryanLee 1 5,090 07-19-2018 03:13 PM
Last Post: BryanLee
Sad RPS & Autoprovisioning issues 247-support 1 6,222 07-12-2018 07:02 PM
Last Post: johnkiniston
  Questions about autoprovisioning for T21P E2 Mauro 4 8,460 03-19-2018 01:50 PM
Last Post: Mauro
  Updating T46 AutoProvisioning Template for Expansion Module fcbayern 1 5,587 09-01-2017 08:14 AM
Last Post: Lucia_Yealink
  Anonymous LDAP access not granted with autoprovisioning Patrick77 2 7,554 06-21-2017 07:05 AM
Last Post: Patrick77
  AutoProvisioning WiFi Dongle Settings Zach Taggett 6 12,683 03-28-2017 02:33 AM
Last Post: Lucia_Yealink
  Autoprovisioning v81 on Metaswitch Jason77 1 5,627 02-27-2017 08:14 AM
Last Post: Peter_Yealink

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication