Auto Provision with DHCP Option 43

[knuckleheadbob]

what would the proper option 43 configuration breakdown to

Vendor Tag Id Type Length Value


packet capture shows option 60 as yealink so this should be the vendor
value, been unsuccessful with the tag id, value would be path to http provisioning. type length is based on the length of the value.

i have been able to successfully use option 43 on a cisco platform with a
generic option 43 ascii value, but have been unable to configure for proper option 43 on edgewater platform

any assistance would be greatly appreciated, as the provisioning guide does not give details on supported encapsulation options