[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cisco configuration for yealink to cisco PoE switch needed
Author Message
wryea Offline
Junior Member
**

Posts: 5
Joined: May 2014
Reputation: 0
Post: #3
RE: cisco configuration for yealink to cisco PoE switch needed
thx for info. I did some more research on this and it seems like cisco is still evolving its support of LLDP, MED TLV's, etc.

I configured this globally:

network-policy profile 5
voice vlan 222

then I configured this on the switchport:

interface GigabitEthernet1/0/4
description TESTPORT
network-policy 5 ! think this controls only the sent LLDP TLV to phone
switchport access vlan 256

now when I try to configure the voice vlan, thinking the switch needs to know about this as well, I get an error:

TESTSW(config-if)#switchport voice vlan 222
Command rejected: Network Policy Profile is configured on this interface

this makes me think that the switch can operate with out the network-policy profile:

interface GigabitEthernet1/0/4
description TESTPORT
no network-policy 5 ! don't need this now
switchport access vlan 256
switchport voice vlan 222

I assume this will also send the LLDP voice vlan TLV to the phone, but im not 100% sure. in both cases, when I configure either option, I inspect the phone to see what it thinks its voice vlan is, and I don't see any change from vlan1. phone still thinks its in vlan1.

definitely am getting confused by poorly designed show commands and displays.

and another question: why when I go into the yealink phone does it always show vid for both wan and pc port = 1, and priority = 0. we have this kind of working in production now, and I verified the phone is definitely tagging voice vlan and it appears like its giving higher priority to the voice traffic via either cos or dscp, but the phone display is not clearly showing me the priority I would expect????
05-08-2014 07:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: cisco configuration for yealink to cisco PoE switch needed - wryea - 05-08-2014 07:12 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 4 6,867 03-24-2022 10:25 PM
Last Post: maindriver
  Configuring OPENVPN with Yealink Commensus 0 557 02-23-2022 09:45 PM
Last Post: Commensus
  Button with led configuration Wesley666 2 5,424 01-27-2022 05:28 AM
Last Post: Beachnuttz
  Read specific variable from phone configuration saivo 0 1,991 06-13-2021 05:23 PM
Last Post: saivo
  Yealink C920 password issue DaveK 3 7,764 09-11-2020 12:02 PM
Last Post: complex1
  Modern Yealink Phonebook Generation Tool rgranholm 2 7,509 04-30-2020 09:03 PM
Last Post: rgranholm
  Multicast / Paging / Intercom - Yealink T58 Ryandh 20 45,944 04-30-2020 03:23 PM
Last Post: Chris708
  Proxy configuration Laurentt 2 5,784 01-07-2020 12:25 PM
Last Post: Laurentt
  Detailed boot process and ways to add local configuration? DanH 2 4,868 10-16-2019 04:24 PM
Last Post: justingoldberg
  YEALINK AUTO PROVISION Dmitryche 1 4,417 08-09-2019 09:25 AM
Last Post: Paz_Yealink

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication