[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
how to erase SIP accounts on SIP-T3X Phones
Author Message
amvalente Offline
Junior Member
**

Posts: 19
Joined: Mar 2014
Reputation: 0
Post: #3
RE: how to erase SIP accounts on SIP-T3X Phones
(05-03-2014 10:40 AM)Yealink Support Wrote:  Sorry. T3 Series don't support %NULL% parameter. Please leave them blank and try again.

I've already tried that, but the phone seems to ignore the empty parameters.
The scenario is:

1) through auto provision I send the following configuration file to the phone:

#!version:1.0.0.1
account.1.auth_name = test
account.1.enable = 1
account.1.label = test
account.1.display_name = test
account.1.outbound_host = 1.1.1.1
account.1.outbound host = 5060
account.1.outbound_proxy_enable = 1
account.1.password = test
account.1.sip_server_host = 1.1.1.1
account.1.sip_server_type = 0
account.1.user_name = test
linekey.1.line = 1
linekey.1.type = 15


2) then I change my mind and I want to leave account 1 blank and program account 2. I send the following configuration file, once again through autoprovision:

#!version:1.0.0.1
account.1.auth_name =
account.1.enable =
account.1.label =
account.1.display_name =
account.1.outbound_host =
account.1.outbound host =
account.1.outbound_proxy_enable =
account.1.password =
account.1.sip_server_host =
account.1.sip_server_type =
account.1.user_name =
linekey.1.line = 1
linekey.1.type = 15

account.2.auth_name = test2
account.2.enable = 1
account.2.label = test2
account.2.display_name = test
account.2.outbound_host = 1.1.1.1
account.2.outbound host = 5060
account.2.outbound_proxy_enable = 1
account.2.password = test2
account.2.sip_server_host = 1.1.1.1
account.2.sip_server_type = 0
account.2.user_name = test2
linekey.1.line = 1
linekey.1.type = 15


Result : the phone kept the both configurations and looking to the level 6 syslog I noticed the following :

May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.auth_name
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.enable
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.label
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.display_name
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.outbound_host
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.outbound_port
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.outbound_proxy_enable
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.password
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.sip_server_host
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.sip_server_port
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.sip_server_type
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :1198] DEB ---Skipped empty value item: account.1.user_name
May 5 08:35:33 autop[426]: [./src/autoParser.cpp :869 ] IFO Update Config Model Parse Finished !
May 5 08:35:33 autop[426]: [./src/autoServer.cpp :755 ] IFO Upgrade finished [OK] !
May 5 08:35:33 autop[426]: [./src/autoServer.cpp :843 ] IFO <<<<<< Autoprovision End >>>>>>



So there's no way to erase the previous configurations through autoprovison, right ? I think this is a huge problem, because it jeopardize the utility of autoprovision.Can I expect future firmware releases on these SIP-T3X phones with %NULL% parameter to reset to factory settings the unused parameters?

Thank you for the prompt answer and hoping that there is a way to solve my problem, hope to hear from you soonSmile
05-05-2014 04:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: how to erase SIP accounts on SIP-T3X Phones - amvalente - 05-05-2014 04:57 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Hard reset a T20P and erase config Kevinlloyd 32 99,946 12-02-2021 05:54 AM
Last Post: callisap
  Configure Yealink Phones autoprov and Action URLS on demand adeo 0 1,235 08-13-2021 09:41 PM
Last Post: adeo
  T4xx phones, load additional configuration after start possible? DanH 0 1,888 04-03-2020 04:02 PM
Last Post: DanH
  How to erase a parameter using autoprovision file Santi 1 4,062 06-21-2019 10:25 AM
Last Post: complex1
  Phones volume keeps turning down John8675309 1 3,369 05-11-2019 05:38 AM
Last Post: Evan_Yealink
  Phones sending INVITEs for CallForward OFF and DND OFF derekb 1 5,094 05-31-2016 06:34 AM
Last Post: Yealink_Michael
  Setting N/A for Softkey does not erase value. phlobot 5 11,219 06-05-2015 11:33 PM
Last Post: phlobot
  3CX and Yealink T-32G phones 805tech 2 8,607 12-04-2014 12:53 AM
Last Post: 805tech
  Auto provision for t26 phones mitcheal 1 7,753 08-06-2013 03:00 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication