[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
problem with pre-provisioning and autoprovisioning during upgrade 25.50.0.20
Author Message
Walter
Unregistered

 
Post: #1
problem with pre-provisioning and autoprovisioning during upgrade 25.50.0.20
Dears,
I have a problem with pre-provisioning and autoprovisioning,
when I upgrade from FW Vers 25.40.0.16 upto 25.50.0.20.

Consider this scenario:
My pre provisioning is via tftp server.
subsequently provisioning is via https.
All works well with previous FW vers 25.40.0.16,
included the automatic upgrade from 25.30.x.xx to 25.40.0.16.


Now I have implemented in my preprovisioning y000000000025.cfg file,
the new option regarding the cert management

#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted.##

#Added the feature that the W52P can now support TLS and SSL certificates since FW vers 25.50.0.20
#security.ca_cert = 0/1/2 (the default value is 2-All Cert)
#security.dev_cert = 0/1 (the default value is 0-Disable)
security.dev_cert = 1


unfortunately the option "security.dev_cert = 1" is not handled by previous version 25.40.0.16.
So although the upgrade from FW Vers 25.40.0.16 upto 25.50.0.20 is done automatic (the upgrade works well),
the W52P go to find the MAC oriented file on my https server but the option "security.dev_cert = 1", is not still handled.

So I necessary to make a manual reset factory default after the FW upgrade,
for repeating the preprovisioning procedure and upload again the y000000000025.cfg.
Since during this second procedure the W52P starts already from version 25.50.0.20 ,
the option "security.dev_cert = 1" is valid, and the provisioning via HTTPS works well too.

This manual reset factory default after the FW upgrade (my workarround) enable to access at my https server.

Have you any suggestion or trick to avoid the manual reset factory default step described above?
Thankyou
Walter
04-29-2014 04:03 PM
     Quote this message in a reply
Post Reply 


Messages In This Thread
problem with pre-provisioning and autoprovisioning during upgrade 25.50.0.20 - Walter - 04-29-2014 04:03 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Thumbs Up Unable to Login after provisioning thenewhomesagent 4 4,309 10-18-2018 07:52 AM
Last Post: thenewhomesagent
  Failed to change provisioning server - W52P jsilva 2 3,814 11-22-2017 12:44 PM
Last Post: janduy.manzanos@gmail.com
  Yealink W52P: Not able to upgrade handset through web interface Igor_ 3 5,942 11-02-2017 04:09 PM
Last Post: complex1
  Yealink W52P: Not able to upgrade handset through web interface Igor_ 0 1,821 11-02-2017 12:45 PM
Last Post: Igor_
  w52p handset. Firmware keeps reverting to old version after upgrade. farrago 0 2,114 07-23-2017 07:00 PM
Last Post: farrago
  Firmware won't upgrade to handset Jeroen 3 5,599 06-06-2017 04:58 PM
Last Post: complex1
  WAN Provisioning W52P on 3CX PBX reiddm 6 9,764 03-02-2017 06:59 AM
Last Post: Jensen_Yealink
  Handset will not upgrade markm 1 3,298 09-08-2016 06:38 PM
Last Post: complex1
  Problem with Calls on Line 2 Downunder55 1 3,803 02-21-2016 11:26 AM
Last Post: Downunder55
  Basestation dropping offline, serving HTTP 500 errors after fw upgrade adsweet76 9 11,884 11-19-2015 05:16 AM
Last Post: adsweet76

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication