[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firmware Upgrade breaks SNTP
Author Message
Mark1972 Offline
Junior Member
**

Posts: 5
Joined: Jan 2013
Reputation: 0
Post: #4
RE: Firmware Upgrade breaks SNTP
(01-09-2013 07:55 PM)Yealink Support Wrote:  
(01-09-2013 12:32 AM)mark.s.lowe Wrote:  We have 10 phones (9 - T26, 1 - T28) and a 3CX PBX server. The phones get their provisioning from the server for SNTP. SNTP working great.

We upgraded to the 3CX supported firmware 6.70.0.103 and SNTP stops working on 9 of the 10 phones. Why?

I've tried the following:

1. Reset to factory default and reprovision - SNTP does not work.

2. Manually set SNTP on the web interface - SNTP does not work.

3. Manually set SNTP on the phone's interface - SNTP does not work.

4. Downgraded firmware back to 6.61.0.83 - SNTP does not work

5. Upgraded firmware back to 6.70.0.103 - SNTO does not work.

Again 1 of the 10 phones is working great. It's not a firewall issue since everything was working prior to the firmware upgrade and 1 of the phones gets its date/time correctly.

Any thoughts?
Hi,
Please help to make below items clear for us.
1. which phone gests the correct date and time after the firmware upgrade?
2. Could you please go to web UI to check if all the NTP servers are the same in all the phone ?
3. Could you please get the PCAP trace to see if the ntp server has response to the phone request about the time and date?


Best Regards!
Yealink Support Team


Answers:
1. A T26 gets the correct time. I actually upgraded the firmware at a later date than the others. But I also think this was on a different firmware than the other 8 T26's prior to the upgrade. It was our spare phone.

2. All phones get the same NTP server and I confirmed it in the WebUI including the working T26.

3. Enclosed PCAP from non working T26 - I change the NTP check frequency to 60 secs. Looks like NTP is resolved but the phone doesn't update on the screen.

Regards,
Mark


Attached File(s)
.pcap  6.70.0.103_16-4-28.pcap (Size: 24.69 KB / Downloads: 4)
(This post was last modified: 01-16-2013 08:03 AM by Mark1972.)
01-16-2013 08:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Firmware Upgrade breaks SNTP - Mark1972 - 01-09-2013, 12:32 AM
RE: Firmware Upgrade breaks SNTP - Mark1972 - 01-16-2013 08:02 AM
RE: Firmware Upgrade breaks SNTP - alanmac - 01-10-2013, 10:45 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Upgrade MP54 from Teams to Zoom andyet 0 295 10-06-2022 01:41 PM
Last Post: andyet
  T29G firmware 46.83.0.130 question Chris708 2 740 09-03-2022 12:10 AM
Last Post: Chris708
  After YDMP upgrade Sub-accounts can't login JohnMc 0 369 08-11-2022 03:47 AM
Last Post: JohnMc
  T56A firmware bin/rom files ftardie 1 1,192 05-25-2022 11:04 PM
Last Post: complex1
  W80DM/W80B - Latest firmware notes?? North40IT 0 863 05-12-2022 02:54 AM
Last Post: North40IT
  WH67 firmware update failed and bricked my headset! dbeiser 1 1,890 03-21-2022 03:51 PM
Last Post: markvdheijden
  custom firmware builder? dewittgarry 1 3,818 08-26-2021 06:49 AM
Last Post: kapetrosyan
  USB Upgrade issues acwells 5 5,520 08-25-2021 10:51 PM
Last Post: Your Voice
  Firmware download for T18P fetoa 1 3,569 03-08-2021 09:06 PM
Last Post: Yisroel_MongoTEL
  VP59 New Firmware mamboz 3 6,731 03-01-2021 09:14 AM
Last Post: Edward_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication