[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G no DHCPv6 RENEW after Reboot if phone stays in same network
Author Message
GeorgSchwarz Offline
Junior Member

Posts: 28
Joined: May 2013
Reputation: 0
Post: #1
T46G no DHCPv6 RENEW after Reboot if phone stays in same network
We are currently introducing IPv6 for our customers. Due to technical circumstances, we are required to use IPv6 DHCP and not stateless autoconfig.

When a T46G is booted up for the very first time, it does a DHCPv6 SOLICIT and keeps on renegotiating the IPv6 address As soon as the phone (set to DHCPv6) is rebooted once, it sticks with the IP-address it had and justs sends a CONFIRM/REPLY on boot However, even if the lease time expires, it will never send a RENEW or Solicit again (as it does when it’s still ‘unbooted’… ) (The CONFIRM/REPLY on boot-up is the only DHCPv6 packet send as long as the phone is turned on)

So you might be lucky if the config it gets from the DHCP-Server is valid but if it’s not you’re stuck until you put the phone into another network, because then, the REPLY to the CONFIRM packet will be negative and the phone will change to the new IP address. (then things work correctly until next reboot)

(Also disabling IPv6 or resetting the phone to factory defaults will not change the problem. It has to be moved to another network. And then the problem does not occur until next reboot) However, we will need to pass DHCP options to the phone and as a result this behavior can be very painful

That issue seems a misbehavior. What is the timeline for it to be fixed?
04-28-2014 06:11 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
T46G no DHCPv6 RENEW after Reboot if phone stays in same network - GeorgSchwarz - 04-28-2014 06:11 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP50 ends call in some phone trees TRK45 0 784 05-10-2023 12:19 AM
Last Post: TRK45
  W73H Remote Phone Directory smithgt 1 1,420 04-26-2023 01:37 AM
Last Post: complex1
  MP50 - Unable to use pound (#) key during a phone call Alexandre Cottinet 0 1,294 02-14-2023 10:28 PM
Last Post: Alexandre Cottinet
  MP50 Phone: Won't hang-up microdaft 4 9,277 02-11-2023 02:38 PM
Last Post: twaldron
  T46U Yealink Phone and WH63 Wireless Headset sforaker 0 1,289 09-06-2022 07:50 PM
Last Post: sforaker
  Phone freezing no access to settings npena 0 3,177 01-28-2022 10:55 PM
Last Post: npena
  MP56 - Speaker Phone Quality UBYeah 7 11,903 01-18-2022 04:45 AM
Last Post: yllw98stng
  SIP Phone VP59 recovery ERROR sakovalev 0 3,267 08-19-2021 10:07 PM
Last Post: sakovalev
  t46g: intercom over speaker rather than headset? asinshesq 23 77,637 07-28-2021 11:04 PM
Last Post: russman
  T46G - Disable Line Key Configuration ? timalex 13 42,689 04-12-2019 09:23 AM
Last Post: Johnny88

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication