T-19 - Default Softkey Labels

[Bryan Nelson]

I am working on setting up provisioning for the T-19p phones, and I am running into a strange issue.

The default label for the far left softkey appears to have "history_Id" as the label on the idle screen, and when in the dialing screen, the same far left softkey has what appears to be "second_BUTTON" as the softkey label rather the the normal "Send".

While I can fix this by setting up custom softkeys in our provisioning, I would prefer to use defaults where possible. Looking at the config dump, the softkeys appear to be setup properly, but do not display as listed in the config. I have attached a cfg and log file for reference.

Firmware version 31.72.0.20

Thanks!

<Dialing>
<Disable>
<Key Type="Empty"/>
<Key Type="History"/>
<Key Type="Switch"/>
<Key Type="Favorite"/>
<Key Type="GPickup"/>
<Key Type="DPickup"/>
<Key Type="Retrieve"/>
</Disable>
<Enable>
<Key Type="Send"/>
<Key Type="IME"/>
<Key Type="Delete"/>
<Key Type="Cancel"/>
</Enable>
<Default>
<Key Type="Send"/>
<Key Type="IME"/>
<Key Type="Delete"/>
<Key Type="Cancel"/>
</Default>
</Dialing>