[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T42G - Handset Mic Volume Too Low.
Author Message
Frank Drews Offline
Member
***

Posts: 63
Joined: Jan 2014
Reputation: 0
Post: #8
RE: T42G - Handset Mic Volume Too Low.
I double checked things. Provisioning in general is working just fine, but not for voice.handset_send =
I changed different values, I changed via the provisioning template, by exporting the Phones config file, and the values for "voice.handset_send = " were not accepted. Setting other values via provisioning worked just fine.
I can change the value by editing the export and reimporting and it does take effect.
We are running 28.73.0.48, this is the Firmware Version supported by 3cx.
Maybe I can get in touch with support? I could provide the provisiong file.



(11-11-2015 10:39 PM)Frank Drews Wrote:  Hi,

a lot of people here are experiencing the situation, that they are barely understood and they have to shout sometimes using the T46G.

Now I tried the
voice.handfree_send =
voice.handset_send =
voice.headset_send =

settings and thex don't seem to have any effect. Should they? I set it to 1 and than to 53 and I could spot no difference.

I really need to make some adjustments on handset.send volume for my T46G.

Is it supposed to work this way?
Any ideas?

Anyway I can check the phone if it got the new settings? Export the config or something?

best regards Frank

I realised that the volume settings are part of the config file. Somehow my provisioning file seems to have no effect. Maybe it is because the provisioning is not working properly. I will let you know about any progress.

Hi,

I checked the provisioning files themselves. The problem is there. The provisioning file for the MAC does not include values for voice.handfree_send =25, and the Type file does inlcude the wrong values.

In the provisioning template there are just the correct values and other changes in the provisioning file are reflected in the MAC-provisioning file just fine. I will have to digg deeper into those different files, until now editing the template in 3cx just worked finde.
(This post was last modified: 11-12-2015 12:56 AM by Frank Drews.)
11-12-2015 12:22 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T42G - Handset Mic Volume Too Low. - Frank Drews - 11-12-2015 12:22 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T42S Handset Clips stratos 0 680 01-26-2022 10:34 PM
Last Post: stratos
  Yealink T42S and T42G Phone stuck at Welcome Pierre06 7 3,771 01-10-2022 11:36 PM
Last Post: Pierre06
  Volume Resetting Complete IT_Support 3 2,587 12-12-2021 04:40 AM
Last Post: complex1
  Yealink T42G Phone stuck at Welcome LFC 8 18,638 11-18-2021 11:20 PM
Last Post: Pierre06
  T42G - Stuck at Welcome screen clevoip 1 2,009 10-15-2021 01:28 AM
Last Post: complex1
  Headset volume keeps defaulting ability_cn 3 4,665 05-07-2021 09:05 PM
Last Post: complex1
  Increase BLF Label Field T42G redmondsau 0 2,051 09-08-2020 11:12 PM
Last Post: redmondsau
  Display after picking up Handset Receiver - T48S cwatts@deltamodtech.com 3 4,540 06-25-2020 09:00 PM
Last Post: rickd@redseal.com
  [SOLVED] OpenVPN not doing anything T42G V83 Danariel 5 10,788 03-27-2020 02:32 PM
Last Post: jamesg224
  Disable SMS/IM Beeping On Handset gflow 1 3,281 02-12-2020 08:31 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication