Call history not showing the right information after an attended transfer

[Chris Barron]

Hi all - I think i have a repeat of the above problem. The calling number i external but the call that's logged onto the c party phone is that of the transferred party. I am using 82.0.20 firmware and the problem seems the same on t41/46/48.

My config is as follows:

************Call History & Dialling*******************
features.call_completion_enable = 0
features.call_log_show_num = 1
features.call_out_history_by_off_hook.enable = 1
features.caller_name_type_on_dialing = 2
features.history_save_display = 1
features.save_call_history = 1
features.save_init_num_to_history.enable = 1
features.save_original_num.enable =1
phone_setting.call_info_display_method =0
phone_setting.called_party_info_display.enable =1
phone_setting.contact_photo_display.enable = 0
phone_setting.incoming_call.horizontal_roll_interval = 30
phone_setting.inter_digit_time = 6
phone_setting.predial_autodial = 0
transfer.save_initia_calllog.enable=1