New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 1 Votes - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Enabling Call Waiting on Yealink T26P
Author Message
CarpeDiemTim Offline
Junior Member
**

Posts: 14
Joined: Feb 2014
Reputation: 0
Post: #7
RE: Enabling Call Waiting on Yealink T26P
(04-02-2014 10:14 PM)Yealink Support Wrote:  You don't need to downgrade your firmware. You can export your config.bin and import it after upgraded successfully. I test in my side and call waiting can work well.
Do you other phone have the same issue?
Does your PBX enable call waiting?

I assigned Line 1 to all three of the line buttons and tested again, but to no avail, I'm afraid. So my only thought at this point would be to downgrade the dysfunctional phone to the same version of firmware that's working on the other T26P, unless you have any further suggestions, of course.

EDIT: I might also add that this wasn't necessary on the other T26P that has functioning call waiting as it stands now.


(04-03-2014 12:00 AM)craigreilly Wrote:  Carpe - can you take the other phone and give it to the receptionist... That will atleast get her running with no more fiddling. Smile

I definitely appreciate the suggestion, but they're basically both receptionists, which is why we got them the T26Ps (so that they can daisy-chain all the extra buttons, which our Cisco phones don't have the capability of doing). So it's a good thought, but I'm afraid it wouldn't really help in this case, as both phones need this feature working.
(This post was last modified: 04-03-2014 12:35 AM by CarpeDiemTim.)
04-03-2014 12:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Enabling Call Waiting on Yealink T26P - CarpeDiemTim - 04-03-2014 12:34 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Multicast / Paging / Intercom - Yealink T58 Ryandh 19 14,416 08-11-2019 07:28 PM
Last Post: Chris708
  YEALINK AUTO PROVISION Dmitryche 1 385 08-09-2019 09:25 AM
Last Post: Paz_Yealink
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 3 484 08-01-2019 12:19 PM
Last Post: Evan_Yealink
  Yealink Dialplan Alain 0 963 09-19-2018 05:10 PM
Last Post: Alain
  USB call recording David D 5 3,595 05-15-2018 07:00 PM
Last Post: YOVU Cloud
  Yealink T48S displays message "No service" David K L 1 2,261 04-17-2018 03:39 AM
Last Post: Paul_Yealink
  T27G no longer option to transfer call during ringing state DmitryTsyganov 1 1,377 04-16-2018 11:16 AM
Last Post: Travis_Yealink
  Call Park customization James Martin 2 1,650 04-02-2018 06:04 PM
Last Post: James Martin
  Yealink Dial Plan RobertCrawford 8 4,878 03-09-2018 06:38 AM
Last Post: Johnny88
  Current time not displayed when a call is missed John62 0 1,032 02-16-2018 05:07 PM
Last Post: John62

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication