(12-28-2012 09:34 AM)Yealink Support Wrote: (12-26-2012 09:56 AM)dimangelid Wrote: Hello,
I have a T26P phone and in general i'm very satisfied from it. I have a problem with the .70 series firmware... Before the release of 6.70.90 firmware i had the 6.61.0.83 . Whenever i called another extension inside my Asterisk PBX (for example my extension is 200 and i call the extension 201 which has the name John), the T26P displayed the extension name after pressing the send button and the other extension started ringing. The T26P retrieved the extension name from my Asterisk PBX. When i installed the 6.70.90 version, that function stopped working. I just tried the 6.70.110 version and it has the same problem. At the same time my Linksys SPA941 does not have that problem. I have tested calling both IAX2 and SIP extensions without any difference. My Asterisk version is 11.1.0, the FreePBX version is 2.11 beta1 and the whole setup is running at Mageia 2 64bit. Can anyone help me?
Hi ,
Thanks for your information .
I have checked the two PCAP traces,do you mean the scenario is :
Yealink T26 register an account 304 which name is "Dimitris1" ,another phone B register an account 307 which name is "Dimitris-PC".
When 304 call 307, in V70 version Yealink T26 show 307 rather than Dimitris-PC, right ?
If yes, could you please help to configure the parameter "Caller ID Header" with "PAI-FROM" and test again ?
The path is :
Login the WEB UI, go to Account-> Advanced page
Then configured the Caller ID Header with PAI-FROM .
Please note , every account has its own Call ID Header , please configure the paramter under the account which you use .
If it can't fix the issue, please let me know .
Best Regards!
Yealink Support Team
You are right, that is the scenario.
I just tried the setting you suggest but it does not fix the issue. I have also tried every option in the Caller ID Header and does not make any difference.
