New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details

Thread Closed 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[FAQ]How to configure dial plan for Yealink phones?
Author Message
Yealink Support Offline

Posts: 2,685
Joined: Dec 2012
Reputation: 19
Post: #2
RE: [FAQ] How to configure dial plan for Yealink phones?
Block Out

Block out rule prevents users from dialing out specific numbers. When the entered numbers match the predefined block out rule, the LCD screen prompts “Forbidden Number”. IP phones support up to 10 block out rules.

To create a block out rule via web user interface:(Take T46G-V72 for example)
1. Click on Settings->Dial Plan->Block Out.
2. Enter the desired value in the BlockOut Number field.
3. Enter the desired line ID in the Account field or leave it blank.
If you leave the field blank or enter 0, the block out rule will apply to all accounts on the IP phone.

[Image: attachment.php?aid=686]

4. Click Confirm to add the block out rule.

The auto provisioning template (CFG file) for dial plan is below:
You can refer to more details in auto provisioning guide and administrator guide in Yealink website.
Support Module of Yealink website
#Note: This file header cannot be edited or deleted.
dialplan.area_code.code =
dialplan.area_code.min_len =
dialplan.area_code.max_len =
dialplan.area_code.line_id =
dialplan.block_out.number.1 =
dialplan.block_out.line_id.1 =
dialplan.dialnow.rule.1 =
dialplan.dialnow.line_id.1 =
dialplan.replace.prefix.1 =
dialplan.replace.replace.1 =
dialplan.replace.line_id.1 =


The priority of dial plan is as below:

High <--- Dial-now <---Replace rule <--- Area Code <--- Block Out <--- Low

Please be aware:

The purpose of these forums is to allow forum members collaborate and help each other.
Questions posted here won't be appreciated.
If you require assistance from Yealink technical support, please email to or USA support

Attached File(s) Thumbnail(s)
(This post was last modified: 04-19-2014 12:21 PM by Yealink Support.)
03-28-2014 10:52 AM
Find all posts by this user    like0    dislike0
Thread Closed 

Messages In This Thread
RE: [FAQ] How to configure dial plan for Yealink phones? - Yealink Support - 03-28-2014 10:52 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink Meeting Server joel 1 387 08-15-2017 10:46 AM
Last Post: joel
  Yealink T21P E2 - Raspberry OpenVPN Kostas 1 3,020 01-03-2017 07:35 AM
Last Post: Kevin_Yealink
  YEALINK T48G sbsinfo 4 2,230 11-06-2016 09:30 AM
Last Post: Lucia_Yealink
  Difference between Yealink IP Phone and Wildix IP Phone Mohamed Chaari 2 4,510 08-29-2016 10:56 PM
Last Post: elena_wildix
  Problem with YEALINK T23G Ana 1 2,106 06-23-2016 09:37 AM
Last Post: Yealink_Karl
  Yealink T27P latest Firmware (Loudspeaker & Hold Volume too loud) bradley.abrahams 2 4,017 05-06-2016 08:58 AM
Last Post: bradley.abrahams
  Yealink VP2009 firmware upgrade with TFTP server fasilkaks 1 5,294 03-05-2016 07:50 AM
Last Post: fraukas
  DHCP issue on Yealink phones with HP Switch HP2920 Crizz 2 3,630 03-03-2016 11:17 AM
Last Post: bunce
  no audio on t22, t26 phones Daniel Gagnon 0 2,098 02-25-2015 02:45 AM
Last Post: Daniel Gagnon
  YEALINK T18 HARD RESET nim 3 5,539 02-10-2015 03:10 PM
Last Post: Yealink_James

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication