[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W52P - Call forward Feature code issue
Author Message
fvanryck Offline
Junior Member

Posts: 1
Joined: May 2016
Reputation: 0
Post: #1
W52P - Call forward Feature code issue

I have configured a Yealink W52P with a Unify Openscape Voice IPBX using TLS.


Firmware Version
Hardware Version

Registration is ok., call in/ call out are OK.

Regarding feature configuration, I try to provision Feature codes to activate/deactivate call forward.

On the PBX, we use the the *40 followed by the extension to activate a call forward unconditional to a specific extension. We use the #40 to disable the call forward unconditional.

I have configured this on the phone in the Menu Phone> Line 1> Feature> Forward section

Activation of the call forward works fine

Desactivation doesn’t work because the phone sends the #40 followed by the extension on the PBX, and the PBX doesn't accept this, it needs only the trigger #40 to deactivate the call forward.

So I try to configure a rule in the dialplan on the W52P

But this dialplan seems to be bypassed when the W52P sends feature code to the PBX.

When I dial #40805 on the keypad, on the phone keypad , the translation to #40 is done and the the Callforward is disabled.

So following my understanding, the W52P should not send the extension after the desactivation feature code ( #40)or we should be able to change the dialed digits through the dialplan.

thanks for your help/advice


(This post was last modified: 05-11-2016 05:57 PM by fvanryck.)
05-11-2016 05:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
W52P - Call forward Feature code issue - fvanryck - 05-11-2016 05:55 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P Repeater RT10/rt20/RT30 schnell-yealink 3 4,946 04-20-2022 10:17 PM
Last Post: complex1
  W52P Firmware upgrade aunijaffer@gmail.com 5 6,969 09-07-2021 11:42 PM
Last Post: complex1
  W52P 2 handsets DAZZLING 1 4,345 06-01-2021 09:55 PM
Last Post: complex1
  W52P Openvpn with mikrotik info@quantiss.com 4 13,687 04-11-2021 06:25 AM
Last Post: Harms_Kubiak
  Slow to ring on incoming call rodcrux 1 4,959 01-25-2021 07:10 PM
Last Post: complex1
  internal call between two base stations fails janus 1 5,244 01-07-2021 07:20 PM
Last Post: complex1
  Is there no call history in web management panel in W52P? poznaniak 1 5,906 08-10-2020 12:49 PM
Last Post: complex1
  W52P factory reset without password ralph 1 7,220 04-02-2020 03:05 AM
Last Post: Yisroel_MongoTEL
  W52p Repair IPMATIKA-Bel 10 21,033 02-10-2020 10:30 PM
Last Post: RobertoDSM
  Action URI in W52P RRC_Support 1 6,133 10-22-2019 01:27 PM
Last Post: anonymous1664059072296

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication