New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344


Thread Closed 
 
Thread Rating:
  • 3 Votes - 4.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[FAQ]How to make and upload LCD LOGO to Yealink phones?
Author Message
Yealink Support Offline
Administrator
*******

Posts: 2,685
Joined: Dec 2012
Reputation: 19
Post: #1
Lightbulb [FAQ]How to make and upload LCD LOGO to Yealink phones?
Yealink IP phones allow you to customize the logo displayed on the LCD screen. SIP-T20P IP phones only support a text logo. SIP-T46G IP phones do not support an LCD logo.

The following table lists the supported logo file format, resolution and total file size for each phone model:

[Image: attachment.php?aid=654]

1. Customizing a logo File

(1). The original picture format must be *.bmp or *.gif.
(2). The new LOGO must be black, white, or 2 gray scale
(3). The file name can’t be too long and include the special characters, recommend to named the file as “adc.bmp”
(4). The “.bmp/.gif” file and “PictureExDemo.exe” application should not be placed in too deeper or the path which include special character , recommend to put them in root dictionary such as D:\


2. Converting a logo File to *.dob using PictureExDemo

We recommend placing all files and the PictureExDemo application to the root directory of the PC.
You can download the firmware by searching in website or refer to more details in below guide.
How to change the logo of Yealink Phones Rev_61.0

(1). Run the PictureExDemo.exe, the current folder will automatically generate a folder named adv;

[Image: attachment.php?aid=655]

(2). After running the application, it will show as followed:

[Image: attachment.php?aid=656]

(3). Click Add button to open a *.bmp or *.gif file.
You can repeat the second step to add multiple original picture files.
(4). Click the Convert button.

[Image: attachment.php?aid=657]

Then you can find the DOB logo files in the adv directory.

3. Upload a logo File to your phone(V72)

A. To configure a custom logo via web user interface:

(1). Click on Features->General Information.
(2). Select Custom logo from the pull-down list of Use Logo.
(3). Click Browse to select the logo file from your local system.
(4). Click Upload to upload the file.
(5). Click Confirm to accept the change.

For SIP-T28P IP phones, the image logo is displayed on the idle screen. For SIP-T42G/T41P/T26P/T22P/T21P/T19P IP phones, the image logo screen and the idle screen are displayed alternately.

B. To configure a text logo via web user interface (only applicable to SIP - T20P IP phones):

(1). Click on Features->General Information.
(2). Select the desired value from the pull-down list of User Logo.
(3). Enter the desired text (0~15 characters) in the Text Logo field.
(4). Click Confirm to accept the change.
The registered account and the configured text logo are displayed alternately.

C. To configure a custom logo via auto provisioning:

Upload the logo file to the provisioning server and then specify the access URL in configuration files:

-------------------------------------------------------------------------------------------------
####################################################
## Configure the access URL of the Logo File ##
####################################################
#(not applicable to SIP - T20P IP phones)

lcd_logo.url =
-------------------------------------------------------------------------------------------------
For example, enter “tftp://192.168.1.100/logo.dob” in the “lcd_logo.url =” field.
During the auto provisioning process, the phone connects to the provisioning server “192.168.1.100”, and downloads the logo file “logo.dob”.

To use the custom logo, you also need to configure the following parameter:

-------------------------------------------------------------------------------------------------
#Configure the logo mode (not applicable to SIP - T20P IP phones).
#0-Disabled (Except for SIP - T28P IP phones), 1-System logo, 2-Custom logo

phone_setting.lcd_logo.mode = 2
-------------------------------------------------------------------------------------------------

To configure a text logo, you need to configure the following parameter:

-------------------------------------------------------------------------------------------------
#Enable or disable a text logo (only applicable to SIP - T20P IP phones).
#0-Disabled, 1-Enabled

phone_setting.lcd_logo.mode = 1
#Configure a text logo (only applicable to SIP - T20P IP phones).
phone_setting.lcd_logo.text =Yealink
-------------------------------------------------------------------------------------------------

After auto provisioning, you will find that the custom logo or text logo appears on the LCD screen.

-------------------------------------------------------------------------------------------------
#Delete all custom logo files (not applicable to SIP - T20P IP phones).
lcd_logo.delete = http://localhost/all
-------------------------------------------------------------------------------------------------

For more information on customizing a logo file,
refer to Yealink_SIP - T2 Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide or How to change the logo of Yealink Phones Rev_61.0.

Please be aware:

The purpose of these forums is to allow forum members collaborate and help each other.
Questions posted here won't be appreciated.
If you require assistance from Yealink technical support, please email to support@yealink.com or USA support support.usa@yealink.com


Attached File(s) Thumbnail(s)
               
(This post was last modified: 05-08-2014 05:26 PM by Yealink Support.)
03-17-2014 11:05 PM
Find all posts by this user    like0    dislike0
Thread Closed 


Messages In This Thread
[FAQ]How to make and upload LCD LOGO to Yealink phones? - Yealink Support - 03-17-2014 11:05 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink Meeting Server joel 1 337 08-15-2017 10:46 AM
Last Post: joel
  Yealink T21P E2 - Raspberry OpenVPN Kostas 1 2,845 01-03-2017 07:35 AM
Last Post: Kevin_Yealink
  YEALINK T48G sbsinfo 4 2,043 11-06-2016 09:30 AM
Last Post: Lucia_Yealink
  Difference between Yealink IP Phone and Wildix IP Phone Mohamed Chaari 2 4,284 08-29-2016 10:56 PM
Last Post: elena_wildix
  Problem with YEALINK T23G Ana 1 1,966 06-23-2016 09:37 AM
Last Post: Yealink_Karl
  Yealink T27P latest Firmware (Loudspeaker & Hold Volume too loud) bradley.abrahams 2 3,815 05-06-2016 08:58 AM
Last Post: bradley.abrahams
  Yealink VP2009 firmware upgrade with TFTP server fasilkaks 1 5,128 03-05-2016 07:50 AM
Last Post: fraukas
  DHCP issue on Yealink phones with HP Switch HP2920 Crizz 2 3,383 03-03-2016 11:17 AM
Last Post: bunce
  no audio on t22, t26 phones Daniel Gagnon 0 2,001 02-25-2015 02:45 AM
Last Post: Daniel Gagnon
  YEALINK T18 HARD RESET nim 3 5,226 02-10-2015 03:10 PM
Last Post: Yealink_James

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication