[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Normal and High radio button setting for send volume
Author Message
jayw654 Offline
Junior Member
**

Posts: 21
Joined: Sep 2013
Reputation: 0
Post: #1
Normal and High radio button setting for send volume
I know have already requested to bring back the Send volume for handset, speakerphone, and headset but I thought of a better idea to make both parties happy.

Why not just create a Normal and High radio button selection setting for the handset, speakerphone, and headset. This way it can at least be somewhat adjust by end user without the risk of losing sound quality, which seem to be the reason it was all but declined previously. As was written back they were inclined to raise the volume by a small amount, which may not be enough. The radio button idea seems to be a better overall solution.

Why am I so persistent? Well as stated I'm a teleworker and you would not believe have many people have poor sounding phones. My job requires me to handle these customers regardless of how bad the CX's phone is. However, to be honest even when not using the phone for work I notice it to be a bit on the low side so even the current setting is a bit too low for send volume.

So my goal is to find a way to get the send volume raised I mean this is supposed to be work device, right? I would think being a teleworker would certainly rank high as one of the reasons for creating Yealink phones in the first place and should be a bit more accommodating for such a situation.

BTW, the normal volume is a bit low so I would say raise it a couple notches then create a high setting based off the increased normal setting. I am requesting, the send volume feature for both the T46G and the T48G.

No disrespect intended but I really do need the send volume raised in fact I need some sort of compromise to the point I'm consider Snom since it does have the setting. I don't mean any type of threat I just need the feature requested for my line of work. Please put it in my perspective would it sound very professional if I told the customer to turn there volume up or down all the time? I have to be able adjust on a per call basis. I need to make sure the send volume is loud enough so I can ensure a variety of people can hear me clearly and without effort.

Lastly, I would like the top volume for the handset earpiece volume to be increase by at least 15 percent.
(This post was last modified: 03-14-2014 01:00 PM by jayw654.)
03-14-2014 12:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Normal and High radio button setting for send volume - jayw654 - 03-14-2014 12:20 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Smile T43U handset only works when headset button is green jaydub 2 280 03-21-2024 07:13 AM
Last Post: jaydub
  Provision Button back to blank glennbtn 0 407 01-10-2024 06:34 PM
Last Post: glennbtn
  Headset Microphone Talkback Volume zeynox 3 2,190 12-14-2023 09:10 AM
Last Post: polinkuer12
  Disable X button to reject calls hercross 0 771 07-07-2023 04:01 PM
Last Post: hercross
  Send different codes on keystroke (enable and disable) Marsl84 0 945 04-21-2023 08:15 PM
Last Post: Marsl84
  cannot transfer to Park line button srcenturic 0 1,779 06-10-2022 01:41 AM
Last Post: srcenturic
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 7,943 05-12-2022 05:41 PM
Last Post: rtfm2022
  T46 - Program Message Button for a Help call? harrys 0 2,526 03-31-2022 11:08 PM
Last Post: harrys
  Volume Resetting Complete IT_Support 3 8,927 12-12-2021 04:40 AM
Last Post: complex1
  T48U - how to remove the DND button from main screen ckatz@bluip.com 1 4,422 11-10-2021 12:05 AM
Last Post: sbrammer

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication