I don't know which feature that you want to configure, i attach all V60-y000000000000.cfg and mac.cfg for you.
y000000000000.cfg-
V60
Code:
[ autop_mode ]
path = /config/Setting/autop.cfg
mode =
schedule_min =
schedule_time =
schedule_time_end =
schedule_dayofweek =
[ PNP ]
path = /config/Setting/autop.cfg
Pnp = 0
[ cutom_option ]
path = /config/Setting/autop.cfg
cutom_option_code0 =
cutom_option_type0 = 1
[ autoprovision ]
path = /config/Setting/autop.cfg
server_address =
user =
password =
[ AES_KEY ]
path = /config/Setting/autop.cfg
aes_key_16 =
aes_key_16_mac =
[ ringtone ]
path = /tmp/download.cfg
server_address =
[ Lang ]
path = /tmp/download.cfg
server_address =
[ ContactList ]
path = /tmp/download.cfg
server_address =
[ UserName ]
path = /config/Advanced/Advanced.cfg
admin =
user =
[ AdminPassword ]
path = /config/Setting/autop.cfg
password =
[ UserPassword ]
path = /config/Setting/autop.cfg
password =
[ firmware ]
path = /tmp/download.cfg
server_type = tftp
server_ip = 10.1.3.110
server_port = 21
login_name =
login_pswd =
http_url =
firmware_name = 2.51.0.10.rom
[ DialNow ]
path = /tmp/dialnow.xml
server_address =
[ ReplaceRule ]
path = /tmp/dialplan.xml
1 = 0,Prefix,Replace
2 = 0,Prefix,Replace
3 = 0,Prefix,Replace
4 = 0,Prefix,Replace
5 = 0,Prefix,Replace
6 = 0,Prefix,Replace
7 = 0,Prefix,Replace
8 = 0,Prefix,Replace
9 = 0,Prefix,Replace
10 = 0,Prefix,Replace
[ AreaCode ]
path = /config/DialRule/areacode.cfg
code =
minlen =
maxlen =
LineID =
[ BlockOut ]
path = /config/DialRule/BlockOut.cfg
#Set Block Out number.
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
10 =
[ BlockOutLineID ]
path = /config/DialRule/BlockOut.cfg
#Set enable account.
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
10 =
[ Forbidden ]
path = /config/Setting/AdvSetting.cfg
DND = 0
FWD = 0
[ Zero ]
path = /yealink/config/Advanced/Advanced.cfg
ForbidZero = 1
WaitTime = 5
[ Transfer ]
path = /config/Setting/AdvSetting.cfg
EnableSemiAttendTran = 1
BlindTranOnHook = 1
TranOthersAfterConf = 0
[ LLDP ]
path = /yealink/config/Network/Network.cfg
EnableLLDP = 0
PacketInterval = 120
[ ActionURL ]
path = /yealink/config/Features/Phone.cfg
SetupCompleted =
LogOn =
LogOff =
RegisterFailed =
Offhook =
Onhook =
IncomingCall =
OutgoingCall =
CallEstablished =
DNDOn =
DNDOff =
AwaysFWDOn =
AwaysFWDOff =
BusyFWDOn =
BusyFWDOff =
NoAnswerFWDOn =
NoAnswerFWDOff =
TransferCall =
BlindTransferCall =
AttendedTransferCall =
Hold =
Unhold =
Mute =
Unmute =
MissedCall =
CallTerminated =
BusytoIdle =
IdletoBusy =
IPChange =
[ WatchDog ]
path = /config/Features/Phone.cfg
IsUse = 1
Time = 10
[ sip ]
path = /config/Setting/AdvSetting.cfg
ReservePound = 1
UseOutBoundInDialog = 1
[ Webserver Type ]
path = /config/Advanced/Advanced.cfg
WebType =
[ port ]
path = /config/Advanced/Advanced.cfg
http_port =
https_port =
[ Forward International ]
path = /yealink/config/Features/Forward.cfg
Enable =
MAC.cfg-
V60
Code:
[ account ]
path = /config/voip/sipAccount0.cfg
Enable =
Label =
DisplayName =
AuthName =
UserName =
password =
SIPServerHost =
SIPServerPort = 5060
UseOutboundProxy = 0
OutboundHost =
OutboundPort = 5060
Transport = 0
BakOutboundHost =
BakOutboundPort = 5060
proxy-require =
AnonymousCall = 0
RejectAnonymousCall = 0
Expire = 3600
SIPListenPort = 5060
Enable 100Rel = 0
precondition = 0
SubscribeRegister = 0
SubscribeMWI = 0
CIDSource = 0
EnableSessionTimer = 0
SessionExpires =
SessionRefresher = 0
EnableUserEqualPhone = 0
srtp_encryption = 0
ptime = 20
ShareLine =
dialoginfo_callpickup =
MissedCallLog = 1
AutoAnswer = 0
AnonymousCall_OnCode =
AnonymousCall_OffCode =
AnonymousReject_OnCode =
AnonymousReject_OffCode =
BLANumber =
conf-type = 0
conf-uri =
BlfListCode =
SubscribeACDExpire= 3600
SubscribeMWIToVM =
SIPServerType =
[ DTMF ]
path = /config/voip/sipAccount0.cfg
DTMFInbandTransfer = 1
InfoType = 0
DTMFPayload = 101
[ NAT ]
path = /config/voip/sipAccount0.cfg
NATTraversal = 0
STUNServer =
STUNPort = 3478
EnableUDPUpdate = 1
UDPUpdateTime = 30
rport = 0
[ ADVANCED ]
path = /config/voip/sipAccount0.cfg
default_t1 = 0.5
default_t2 = 4
default_t4 = 5
[blf]
path = /config/voip/sipAccount0.cfg
SubscribePeriod = 1800
BLFList_URI =
[ audio0 ]
path = /config/voip/sipAccount0.cfg
enable = 1
PayloadType = PCMU
priority = 1
rtpmap = 0
[ audio1 ]
path = /config/voip/sipAccount0.cfg
enable = 1
PayloadType = PCMA
priority = 2
rtpmap = 8
[ audio2 ]
path = /config/voip/sipAccount0.cfg
enable = 0
PayloadType = G723_53
priority = 0
rtpmap = 4
[ audio3 ]
path = /config/voip/sipAccount0.cfg
enable = 0
PayloadType = G723_63
priority = 0
rtpmap = 4
[ audio4 ]
path = /config/voip/sipAccount0.cfg
enable = 1
PayloadType = G729
priority = 3
rtpmap = 18
[ audio5 ]
path = /config/voip/sipAccount0.cfg
enable = 1
PayloadType = G722
priority = 4
rtpmap = 9
[ audio7 ]
path = /config/voip/sipAccount0.cfg
enable = 0
PayloadType = G726-16
priority = 0
rtpmap = 112
[ audio8 ]
path = /config/voip/sipAccount0.cfg
enable = 0
PayloadType = G726-24
priority = 0
rtpmap = 102
[ audio9 ]
path = /config/voip/sipAccount0.cfg
enable = 0
PayloadType = G726-32
priority = 0
rtpmap = 2
[ audio10 ]
path = /config/voip/sipAccount0.cfg
enable = 0
PayloadType = G726-40
priority = 0
rtpmap = 104
[ RingTone ]
path = /config/voip/sipAccount0.cfg
RingType = commom
[ WAN ]
path = /config/Network/Network.cfg
#WANType:0:DHCP,1:PPPoE,2:StaticIP
WANType = 0
WANStaticIP =
WANSubnetMask =
WANDefaultGateway =
[ DNS ]
path = /config/Network/Network.cfg
PrimaryDNS =
SecondaryDNS =
[ PPPoE ]
path = /config/Network/Network.cfg
PPPoEUser =
PPPoEPWD =
[ LAN ]
path = /config/Network/Network.cfg
#LANTYPE:0:Router, 1:Bridge
LANTYPE = 1
RouterIP = 10.0.0.1
LANSubnetMask = 255.255.255.0
EnableDHCP = 1
DHCPStartIP = 10.0.0.10
DHCPEndIP = 10.0.0.100
SpanToPCPort = 0
[ VLAN ]
path = /config/Network/Network.cfg
#ISVLAN,VID and USRPRIORITY are used for VLAN on LAN port
#PC_PORT_VLAN_ENABLE,PC_PORT_VID and PC_PORT_PRIORITY are used for PC port
ISVLAN = 0
VID = 0
USRPRIORITY = 0
PC_PORT_VLAN_ENABLE = 0
PC_PORT_VID = 0
PC_PORT_PRIORITY = 0
[ QOS ]
path = /config/Network/Network.cfg
SIGNALTOS = 40
RTPTOS = 40
[ RTPPORT ]
path = /config/Network/Network.cfg
MaxRTPPort = 11800
MinRTPPort = 11780
[ SYSLOG ]
path = /config/Network/Network.cfg
#specify the server for syslog storage
SyslogdIP =
[ 802.1X ]
path = /config/Network/Network.cfg
Mode = 0
Identity =
MD5Passwd =
[ VPN ]
path = /config/Network/Network.cfg
EnableVPN =0
[ Ethernet ]
path = /config/Network/Network.cfg
WANPortLink = 0
PCPortLink = 0
[ Lang ]
path = /config/Setting/Setting.cfg
#WebLanguage is the setting of language on web management
WebLanguage =
[ Time ]
path = /config/Setting/Setting.cfg
TimeZone = +8
TimeServer1 = cn.pool.ntp.org
TimeServer2 = cn.pool.ntp.org
Interval = 1000
#Set daylight saving time.SummerTime 0 means disable,1 means enable, 2 means automatic
SummerTime = 2
StartTime =
EndTime =
TimeFormat =
DateFormat =
OffSetTime =
DSTTimeType =
[ PhoneSetting ]
path = /config/Setting/Setting.cfg
InterDigitTime = 4
FlashHookTimer = 1
Lock = 0
Ringtype = Ring1.wav
BackLight = 2
BacklightTime = 30
ProductName =
Contrast =
HandFreeSpkVol = 8
HandFreeMicVol = 8
HandSetSpkVol = 8
HandSetMicVol = 8
HeadSetSpkVol = 8
HeadSetMicVol = 8
RingVol= 8
RingForTranFailed = Ring1.wav
LogonWizard = 0
PreDialAutoDial = 0
IsDeal180 = 0
DialNowDelay = 1
IsDefineKey = 0
LogLevel =
[ SignalToneVol ]
path = /config/Setting/Setting.cfg
Handset = 8
Headset = 8
Handfree = 8
[ AlertInfo0 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlertInfo1 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlertInfo2 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlertInfo3 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlertInfo4 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlertInfo5 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlertInfo6 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlertInfo7 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlertInfo8 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlertInfo9 ]
path = /config/Setting/Setting.cfg
Text =
Ringer =
[ AlwaysFWD ]
path = /config/Features/Forward.cfg
Enable = 0
Target =
On_Code =
Off_Code =
[ BusyFWD ]
path = /config/Features/Forward.cfg
Enable = 0
Target =
On_Code =
Off_Code =
[ TimeoutFWD ]
path = /config/Features/Forward.cfg
Enable = 0
Target =
Timeout = 10
On_Code =
Off_Code =
[ Features ]
path = /config/Features/Phone.cfg
Call_Waiting = 1
Hotlinenumber =
BusyToneDelay =
LCD_Logo =
DND_Code =
Refuse_Code =
DND_On_Code =
DND_Off_Code =
ButtonSoundOn = 1
CallCompletion = 0
AllowIntercom = 1
IntercomMute = 0
IntercomTone = 1
IntercomBarge = 1
Call_WaitingTone = 1
Hotlinedelay = 4
SendKeySoundOn = 1
BroadsoftFeatureKeySync = 0
PswPrefix =
PswLength =
PswDialEnable = 0
HistorySaveDisplay = 1
SaveCallHistory = 1
PswPrefix =
PswLength =
PswDialEnable = 0
HistorySaveDisplay = 1
SaveCallHistory = 1
ButtonSoundOn = 1
ClosePowerLight =
HideDTMF =
HideDTMFDelay =
DTMFRepetition =
ActionURILimitIP =
[ RingerDevice ]
path = /config/Features/Phone.cfg
IsUseHeadset = 0
[ Trans ]
path = /config/Features/Phone.cfg
IsOnHookTrans = 1
[ AutoRedial ]
path = /config/Features/Phone.cfg
EnableRedial = 0
RedialInterval = 10
RedialTimes = 10
[ PoundSend ]
path = /config/Features/Phone.cfg
#Set # key or * key as send. #:1 and *:2
Enable = 1
[ Emergency ]
path = /config/Features/Phone.cfg
Num =
[ memory1 ]
path = /config/vpPhone/vpPhone.ini
#Line means the line taken in use.0 stands for auto,1 stands for line1...except for one condition when type is blf(DKtype:16),0 stands for line1,1 stands for line2...
#DKtype defines the type of the key,ranging from 0 to 17
#DKtype 0:N/A 1:Conference 2:Forward 3:Transfer
#DKtype 4:Hold 5:DND 6:Redial 7:Call Return
#DKtype 8:SMS 9:Call Pickup 10:Call Park 11:DTMF
#DKtype 12:Voicemail 13:SpeedDial 14:Intercom 15:Line(for line key only)
#DKtype 16:BLF 17:URL 18:Group Listening 19:Public Hold
#DKtype 20:Private Hold 21:Shared Line 22:XML Gruop 23:Group Pickup
#DKtype 24:Paging 25:Record 35: URL Record 27:XMLbrowser
#DKtype 34:Hot Desking 38:LDAP 39:BLF List 40:Prefix
#DKtype 41:Zero-Sp-Touch 42:ACD 45Local Gruop 46:Broadsoft Group
#Set Memory key1
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory2 ]
path = /config/vpPhone/vpPhone.ini
#Set Memory key2
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory3 ]
path = /config/vpPhone/vpPhone.ini
#Set Memory key3
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory4 ]
path = /config/vpPhone/vpPhone.ini
#Set Memory key4
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory5 ]
path = /config/vpPhone/vpPhone.ini
#Set Memory key5
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory6 ]
path = /config/vpPhone/vpPhone.ini
#Set Memory key6
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory7 ]
path = /config/vpPhone/vpPhone.ini
#Set Memory key7
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory8 ]
path = /config/vpPhone/vpPhone.ini
#Set Memory key8
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory9 ]
path = /config/vpPhone/vpPhone.ini
#Set Memory key9
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory10 ]
path = /config/vpPhone/vpPhone.ini
#Set Memory key10
Line =
Value =
type =
PickupValue =
DKtype =
XMLPhoneBook =
[ memory11 ]
path = /config/vpPhone/vpPhone.ini
#from memory11 to memory 16 are settings for 6 line keys of T28
#DKtype value is the same as it is defined for memory keys.Except for one that the line keys cannot be set to blf(DKtype:16).
#Set line key1
Line =
Value =
type =
PickupValue =
DKtype =
Label =
XMLPhoneBook =
[ memory12 ]
path = /config/vpPhone/vpPhone.ini
#Set line key2
Line =
Value =
type =
PickupValue =
DKtype =
Label =
XMLPhoneBook =
[ memory13 ]
path = /config/vpPhone/vpPhone.ini
#Set line key3
Line =
Value =
type =
PickupValue =
DKtype =
Label =
XMLPhoneBook =
[ memory14 ]
path = /config/vpPhone/vpPhone.ini
#Set line key4
Line =
Value =
type =
PickupValue =
DKtype =
Label =
XMLPhoneBook =
[ memory15 ]
path = /config/vpPhone/vpPhone.ini
#Set line key5
Line =
Value =
type =
PickupValue =
DKtype =
Label =
XMLPhoneBook =
[ memory16 ]
path = /config/vpPhone/vpPhone.ini
#Set line key6
Line =
Value =
type =
PickupValue =
DKtype =
Label =
XMLPhoneBook =
[programablekey1]
path = /config/vpPhone/vpPhone.ini
#DKtype 0:N/A 2:Forward 5:DND 6:Redial
#DKtype 7:Call Return 8:SMS 9:Call Pickup 22:XML Group
#DKtype 28:Call List 29:Directory 30:Menu 31:Switch Account
#DKtype 32:New SMS 33:Status 43:Local Group 44:Broadsoft Phonebook
#DKtype 45:Local Gruop 46:Broadsoft Group 47:XML Phonebook
#Set SoftKey1
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey2]
path = /config/vpPhone/vpPhone.ini
#Set SoftKey2
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey3]
path = /config/vpPhone/vpPhone.ini
#Set SoftKey3
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey4]
path = /config/vpPhone/vpPhone.ini
#Set SoftKey4
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey5]
path = /config/vpPhone/vpPhone.ini
#Set Up key
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey6]
path = /config/vpPhone/vpPhone.ini
#Set Down key
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey7]
path = /config/vpPhone/vpPhone.ini
#Set Left key
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey8]
path = /config/vpPhone/vpPhone.ini
#Set Right key
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey9]
path = /config/vpPhone/vpPhone.ini
#Set OK key
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey10]
path = /config/vpPhone/vpPhone.ini
#Set Cancel key
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey11]
path = /config/vpPhone/vpPhone.ini
#Set CONF key
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey12]
path = /config/vpPhone/vpPhone.ini
#Set HOLD key
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey13]
path = /config/vpPhone/vpPhone.ini
#Set MUTE key
DKtype =
Line =
Value =
XMLPhoneBook =
[programablekey14]
path = /config/vpPhone/vpPhone.ini
#Set TRAN key
DKtype =
Line =
Value =
XMLPhoneBook =
[ Profile ]
path = /config/vpm.cfg
VAD = 0
CNG = 1
ECHO = 1
SIDE_TONE = -3
headset_send = 29
[ Jitter ]
path = /config/vpm.cfg
Adaptive = 1
Min = 0
Max = 300
Nominal = 120
[ Message ]
path = /config/Features/Message.cfg
#Set voicemail number for each account
VoiceNumber0 =
VoiceNumber1 =
VoiceNumber2 =
VoiceNumber3 =
VoiceNumber4 =
VoiceNumber5 =
[ Country ]
path = /config/voip/tone.ini
#The tones are defined by countries.If Country = Custom,the customized values will be used.
Country =
[ Tone Param ]
path = /config/voip/tone.ini
dial =
ring =
busy =
congestion =
callwaiting =
dialrecall =
record =
info =
stutter =
message =
autoanswer =
[ RemotePhoneBook0 ]
path = /config/Setting/Setting.cfg
URL =
Name =
[ RemotePhoneBook1 ]
path = /config/Setting/Setting.cfg
URL =
Name =
[ RemotePhoneBook2 ]
path = /config/Setting/Setting.cfg
URL =
Name =
[ RemotePhoneBook3 ]
path = /config/Setting/Setting.cfg
URL =
Name =
[ RemotePhoneBook4 ]
path = /config/Setting/Setting.cfg
URL =
Name =
[ Key0 ]
Path = /config/vpPhone/Ext38_00000000000001.cfg
DKtype =
Line =
Value =
type =
PickupValue =
Label =
[ Key1 ]
Path = /config/vpPhone/Ext38_00000000000001.cfg
DKtype =
Line =
Value =
type =
PickupValue =
Label =
[ Key0 ]
Path = /config/vpPhone/Ext38_00000000000002.cfg
DKtype =
Line =
Value =
type =
PickupValue =
Label =
[ Key1 ]
Path = /config/vpPhone/Ext38_00000000000002.cfg
DKtype =
Line =
Value =
type =
PickupValue =
Label =
[ FactoryConfig ]
path = /config/Setting/AdvSetting.cfg
CustomEnabled = 0
[ LDAP ]
Path = /config/Contacts/LDAP.cfg
NameFilter=
NumberFilter=
host= 0.0.0.0
port= 389
base=
user=
pswd=
MaxHits= 50
NameAttr=
NumbAttr=
DisplayName=
version= 3
SearchDelay= 0
CallInLookup= 1
LDAPSort= 1
DialLookup= 0
[ ManagementServer ]
path = /config/TR069/tr069.ini
ConnectionRequestUsername =
ConnectionRequestPassword =
url =
PeriodicInformEnable = 0
PeriodicInformInterval =
EnableTR069 = 0
Username =
Password =
[ Account0 ]
path = /config/Contacts/BroadSoft.cfg
DisplayName =
Server =
Port =
UserName =
PassWord =
[ CallLog0 ]
path = /config/Contacts/BroadSoft.cfg
DisplayName =
Server =
Port =
UserName =
PassWord =
[ REGSURGE ]
path = /config/Network/Network.cfg
RegSurgePrevention = 0
[ TrustedCertificates ]
path = /tmp/PEM_certificate0.crt
option =
server_address =
[ https ]
path = /config/Setting/Setting.cfg
TrustCertificates = 1
[ ServerCertificates ]
path = /tmp/server.pem
option =
server_address =
[ ACD ]
path = /yealink/config/Features/Phone.cfg
AutoAvailable = 0
AutoAvailableTimer = 60
Broadsoft = 0
[ PushXML ]
path = /yealink/config/Setting/AdvSetting.cfg
ServerIP =
[ BroadSoft ]
path = /yealink/config/Contacts/BroadSoft.cfg
BWCallLogandDir = 0
BeHaveCallLog = 1
BeHaveBWDir = 1
[CustomSoftKey_CallFailed]
path = /tmp/CallFailed.xml
server_address =
[CustomSoftKey_CallIn]
path = /tmp/CallIn.xml
server_address =
[CustomSoftKey_Connecting]
path = /tmp/Connecting.xml
server_address =
[CustomSoftKey_Dialing]
path = /tmp/Dialing.xml
server_address =
[CustomSoftKey_RingBack]
path = /tmp/RingBack.xml
server_address =
[CustomSoftKey_Talking]
path = /tmp/Talking.xml
server_address =
[key0]
Path=/config/vpPhone/Ext38_00000000000001.cfg
DKtype =
Line =
Value =
type =
PickupValue =
Label =
####MAC ADD####
[ Forward International ]
path = /yealink/config/Features/Forward.cfg
Enable =
[ port ]
path = /config/Advanced/Advanced.cfg
http_port =
https_port =
[ Webserver Type ]
path = /config/Advanced/Advanced.cfg
WebType =
[ sip ]
path = /config/Setting/AdvSetting.cfg
ReservePound = 1
UseOutBoundInDialog = 1
[ WatchDog ]
path = /config/Features/Phone.cfg
IsUse = 1
Time = 10
[ Forbidden ]
path = /config/Setting/AdvSetting.cfg
DND = 0
FWD = 0
[ Zero ]
path = /yealink/config/Advanced/Advanced.cfg
ForbidZero = 1
WaitTime = 5
[ Transfer ]
path = /config/Setting/AdvSetting.cfg
EnableSemiAttendTran = 1
BlindTranOnHook = 1
TranOthersAfterConf = 0
[ LLDP ]
path = /yealink/config/Network/Network.cfg
EnableLLDP = 0
PacketInterval = 120
[ ActionURL ]
path = /yealink/config/Features/Phone.cfg
SetupCompleted =
LogOn =
LogOff =
RegisterFailed =
Offhook =
Onhook =
IncomingCall =
OutgoingCall =
CallEstablished =
DNDOn =
DNDOff =
AwaysFWDOn =
AwaysFWDOff =
BusyFWDOn =
BusyFWDOff =
NoAnswerFWDOn =
NoAnswerFWDOff =
TransferCall =
BlindTransferCall =
AttendedTransferCall =
Hold =
Unhold =
Mute =
Unmute =
MissedCall =
CallTerminated =
BusytoIdle =
IdletoBusy =
IPChange =
[ autop_mode ]
path = /config/Setting/autop.cfg
mode =
schedule_min =
schedule_time =
schedule_time_end =
schedule_dayofweek =
[ PNP ]
path = /config/Setting/autop.cfg
Pnp = 0
[ cutom_option ]
path = /config/Setting/autop.cfg
cutom_option_code0 =
cutom_option_type0 = 1
[ autoprovision ]
path = /config/Setting/autop.cfg
server_address =
user =
password =
[ AES_KEY ]
path = /config/Setting/autop.cfg
aes_key_16 =
aes_key_16_mac =
[ ringtone ]
path = /tmp/download.cfg
server_address =
[ Lang ]
path = /tmp/download.cfg
server_address =
[ ContactList ]
path = /tmp/download.cfg
server_address =
[ UserName ]
path = /config/Advanced/Advanced.cfg
admin =
user =
[ AdminPassword ]
path = /config/Setting/autop.cfg
password =
[ UserPassword ]
path = /config/Setting/autop.cfg
password =
[ firmware ]
path = /tmp/download.cfg
server_type = tftp
server_ip =
server_port =
login_name =
login_pswd =
http_url =
firmware_name =
[ DialNow ]
path = /tmp/dialnow.xml
server_address =
[ ReplaceRule ]
path = /tmp/dialplan.xml
1 = 0,Prefix,Replace
2 = 0,Prefix,Replace
3 = 0,Prefix,Replace
4 = 0,Prefix,Replace
5 = 0,Prefix,Replace
6 = 0,Prefix,Replace
7 = 0,Prefix,Replace
8 = 0,Prefix,Replace
9 = 0,Prefix,Replace
10 = 0,Prefix,Replace
[ AreaCode ]
path = /config/DialRule/areacode.cfg
code =
minlen =
maxlen =
LineID =
[ BlockOut ]
path = /config/DialRule/BlockOut.cfg
#Set Block Out number.
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
10 =
[ BlockOutLineID ]
path = /config/DialRule/BlockOut.cfg
#Set enable account.
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
10 =
