[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G use light to indicate message instead of popup
Author Message
nicknomo Offline

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #7
RE: T46G use light to indicate message instead of popup
(05-22-2014 09:26 PM)jaikens Wrote:  I use the T48G, and I have users complaining about the VM and Missed Call Pop-ups also. I am using release for Broadsoft. Is there a new release with the option to disable pop-ups?

I don't believe this is in the firmware yet, although they did mention it was a popular complaint and they will be adding the ability to disable popups in future revisions. The T38G sort of does this too, but the appearence on the T46G makes it look more intrusive.

(05-22-2014 09:40 PM)pdwsmith Wrote:  A question about T46G soft keys.

We have DSS key 6, 7 & 8 as BLF keys to frequent contacts.

On most of the T46Gs, the lamps in the soft keys are unlit. However, on one phone, the lights all show green. Any ideas why ?

On my phone system, BLFs are used to monitor other extensions. The color changes based on the activity of those lines. Red is in use, blinking red means there is an incoming calls, and then there is an "idle" state.

There is an option for BLF mode, and it determines the behavior of the BLF lights. The light for the idle state can be toggled so that it is either green when idle, or off when idle. Its an all or none sort of thing, so it effects all lights.

This setting is under General->Features->BLF LED mode. Mine is set on 0, which shows a green light when idle. I'm not exactly sure how modes 1,2 and 3 are different, but it is explained somewhere in the autoprovision manual. Some of these modes have the light unlit when there is no activity.
(This post was last modified: 05-23-2014 12:30 PM by nicknomo.)
05-23-2014 12:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
RE: T46G use light to indicate message instead of popup - nicknomo - 05-23-2014 12:17 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Phone message speed grstorga 0 338 04-08-2022 01:56 AM
Last Post: grstorga
  T46 - Program Message Button for a Help call? harrys 0 402 03-31-2022 11:08 PM
Last Post: harrys
  Feature Request T46G - Return to page 1 imfloridaguy 4 8,157 08-30-2021 12:34 AM
Last Post: eric@hudsonvalleygeek.com
  T46G with EXP40 Sidecars Programming Burl 0 1,892 05-27-2021 11:35 PM
Last Post: Burl
  T46G/T48G no Ringtone because of 183 insted of ringing eurix 2 3,450 04-09-2021 05:16 PM
Last Post: eurix
Heart T46G/T46S - Permission Denied! andy.hughes@intelligencehs.co.uk 1 3,855 03-19-2021 08:59 PM
Last Post: Yisroel_MongoTEL
  yealink t46g Ssl VPN sarajennifer 0 2,142 03-11-2021 02:41 PM
Last Post: sarajennifer
  Call-Info sip header for T46G sidjf3zhdu 9 21,499 02-22-2021 04:06 PM
Last Post: jiansong
  yealink T46g cannot disable lcd screensaver mike702 2 3,644 02-10-2021 04:33 AM
Last Post: jamesbchz
Bug Yealink T46G wont turn on after firmware update mike702 1 3,359 02-02-2021 08:21 PM
Last Post: complex1

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication