[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G use light to indicate message instead of popup
Author Message
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #7
RE: T46G use light to indicate message instead of popup
(05-22-2014 09:26 PM)jaikens Wrote:  I use the T48G, and I have users complaining about the VM and Missed Call Pop-ups also. I am using release 35.72.193.10 for Broadsoft. Is there a new release with the option to disable pop-ups?

I don't believe this is in the firmware yet, although they did mention it was a popular complaint and they will be adding the ability to disable popups in future revisions. The T38G sort of does this too, but the appearence on the T46G makes it look more intrusive.

(05-22-2014 09:40 PM)pdwsmith Wrote:  A question about T46G soft keys.

We have DSS key 6, 7 & 8 as BLF keys to frequent contacts.

On most of the T46Gs, the lamps in the soft keys are unlit. However, on one phone, the lights all show green. Any ideas why ?

On my phone system, BLFs are used to monitor other extensions. The color changes based on the activity of those lines. Red is in use, blinking red means there is an incoming calls, and then there is an "idle" state.

There is an option for BLF mode, and it determines the behavior of the BLF lights. The light for the idle state can be toggled so that it is either green when idle, or off when idle. Its an all or none sort of thing, so it effects all lights.

This setting is under General->Features->BLF LED mode. Mine is set on 0, which shows a green light when idle. I'm not exactly sure how modes 1,2 and 3 are different, but it is explained somewhere in the autoprovision manual. Some of these modes have the light unlit when there is no activity.
(This post was last modified: 05-23-2014 12:30 PM by nicknomo.)
05-23-2014 12:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T46G use light to indicate message instead of popup - nicknomo - 05-23-2014 12:17 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Need bin and rfs files SIP-T46G RobbyK 1 737 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 975 01-11-2024 10:52 PM
Last Post: RobbyK
  T46G recovery files evoip 1 1,373 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  T46G Multiple EXT Port amandah 2 1,978 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,136 03-29-2023 05:36 AM
Last Post: matthewchubb
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 11,557 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 10,022 10-28-2022 03:28 AM
Last Post: tredd1982
  T46G SSL 2 & 3 Vulnerability russavd 0 1,431 09-24-2022 05:07 AM
Last Post: russavd
  T46G - shortcut to activate/ deactivate accounts? westats 4 5,474 07-07-2022 11:40 AM
Last Post: westats
  WH63 Connect to T46G 79schultz 1 2,813 07-06-2022 03:08 PM
Last Post: markvdheijden

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication