[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MWI tone still played when stutter=0 is set
Author Message
bradleyland Offline
Junior Member
**

Posts: 2
Joined: Mar 2014
Reputation: 0
Post: #3
RE: MWI tone still played when stutter=0 is set
Setting message tone to 0 did the trick. Thanks!

Can you tell me if this is the correct auto-provisioning parameter? I found this in the 'Common.cfg' included with the auto-provisioning guide.

voice.tone.message = 0

Also, I just verified the firmware version through the web GUI as 38.70.0.186 (screenshot attached). I can't even find this firmware on the Yealink website, but I do see that the current firmware version is 30.70.0.125

It looks like there are some firmwares available on the website which are supported by third-party vendors. Our phones auto-provision through Kerio Operator. Do you happen to know if Kerio is authorized to use a custom firmware?


Attached File(s) Thumbnail(s)
   
(This post was last modified: 03-11-2014 09:44 PM by bradleyland.)
03-11-2014 09:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: MWI tone still played when stutter=0 is set - bradleyland - 03-11-2014 09:43 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48G - busy tone for a second incomming call Dirk 8 12,976 01-17-2017 05:36 PM
Last Post: complex1
  Produce DTMF tone with SIP INFO (T46G) nicknomo 5 13,078 04-02-2014 05:50 PM
Last Post: Yealink Support
  No dial tone/cannot hear each other but can call and joejess 1 7,125 10-28-2013 05:23 PM
Last Post: Yealink Support
  Longer DTMF Tone for call bridges T26P markus.pfirrmann 3 8,743 08-19-2013 05:25 PM
Last Post: Yealink Support
  distinctive ring tone for 3CX stash 1 18,341 01-30-2013 08:07 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication