MWI tone still played when stutter=0 is set

[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Thread Rating:

0 Votes - 0 Average
1
2
3
4
5

Threaded Mode \| Linear Mode MWI tone still played when stutter=0 is set
Author	Message

bradleyland Offline

Junior Member

Posts: 2

Joined: Mar 2014

Reputation: 0

Post: #3

RE: MWI tone still played when stutter=0 is set

Setting message tone to 0 did the trick. Thanks!

Can you tell me if this is the correct auto-provisioning parameter? I found this in the 'Common.cfg' included with the auto-provisioning guide.

voice.tone.message = 0

Also, I just verified the firmware version through the web GUI as 38.70.0.186 (screenshot attached). I can't even find this firmware on the Yealink website, but I do see that the current firmware version is 30.70.0.125

It looks like there are some firmwares available on the website which are supported by third-party vendors. Our phones auto-provision through Kerio Operator. Do you happen to know if Kerio is authorized to use a custom firmware?

Attached File(s) Thumbnail(s)

(This post was last modified: 03-11-2014 09:44 PM by bradleyland.)

03-11-2014 09:43 PM

« Next Oldest | Next Newest »

Messages In This Thread

MWI tone still played when stutter=0 is set - bradleyland - 03-10-2014, 11:57 PM

RE: MWI tone still played when stutter=0 is set - Yealink Support - 03-11-2014, 12:23 PM

RE: MWI tone still played when stutter=0 is set - bradleyland - 03-11-2014 09:43 PM

RE: MWI tone still played when stutter=0 is set - Yealink Support - 03-12-2014, 06:45 PM

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	No dial tone when connecting calls internally	tvettel	0	97	04-17-2024 02:20 PM Last Post: tvettel
	Set sign tone for different Direct Dials	Final Cut	1	2,468	05-23-2022 10:23 PM Last Post: Yisroel_MongoTEL
	T48G - busy tone for a second incomming call	Dirk	8	20,042	01-17-2017 05:36 PM Last Post: complex1
	Produce DTMF tone with SIP INFO (T46G)	nicknomo	5	18,191	04-02-2014 05:50 PM Last Post: Yealink Support
	No dial tone/cannot hear each other but can call and	joejess	1	10,090	10-28-2013 05:23 PM Last Post: Yealink Support
	Longer DTMF Tone for call bridges T26P	markus.pfirrmann	3	12,090	08-19-2013 05:25 PM Last Post: Yealink Support
	distinctive ring tone for 3CX	stash	1	21,823	01-30-2013 08:07 PM Last Post: Yealink Support

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Log in