[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G - Enable Time Zone Selection
Author Message
solutions@singlesource.net Offline
Dubbs
**

Posts: 2
Joined: Mar 2014
Reputation: 0
Post: #1
T46G - Enable Time Zone Selection
Using T46G behind Broadsoft firmware version 28.71.193.8. I am looking for the configuration file that will allow me to choose a time zone so the phone will display the correct time. Currently this is only available via the GUI. Time zone defaults to -11 Samoa. This is my current configuration:

#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org.
local_time.ntp_server1 = %SNTP_SERVER_1%
local_time.ntp_server2 = %SNTP_SERVER_2%

#Configure the update interval (in seconds) when using the NTP server. The default value is 1000.
local_time.interval =

#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default);
local_time.summer_time = 2

#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-By Week;
local_time.dst_time_type =

#Configure the start time of DST. The default value is 1/1/0.
#If the DST type is configured as By Date, the value format is Month/Day/Hour. For example, the value 5/20/10 means the start time is at 10:00 on May 20.
#If the DST type is configured as By Week, the value format is Month/Day of Week/Day of Week Last in Month/Hour of Day.
#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday of the 4th week in January.
local_time.start_time =

#Configure the end time of DST. The default value is 12/31/23. The value format is the same to the start time.
local_time.end_time =

#Configure the offset time (in minutes). It ranges from -300 to 300, the default value is 60.
local_time.offset_time =

#Configure the time format; 0-12 Hour, 1-24 Hour (default);
local_time.time_format = 0-12 Hour

#Configure the date format; 0-WWW MMM DD (default), 1-DD-MMM-YY, 2-YYYY-MM-DD, 3-DD/MM/YYYY, 4-MM/DD/YY, 5-DD MMM YYYY, 6-WWW DD MMM;
local_time.date_format =

#Enable or disable the DHCP Time; 0-Disabled (default), 1-Enabled;
local_time.dhcp_time =

local_time.manual_time_enable = 0



Thank you
03-10-2014 11:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T46G - Enable Time Zone Selection - solutions@singlesource.net - 03-10-2014 11:24 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T44W Time/Date Format plonghomes 6 786 03-05-2024 10:34 PM
Last Post: plonghomes
  Need bin and rfs files SIP-T46G RobbyK 1 729 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 965 01-11-2024 10:52 PM
Last Post: RobbyK
  T48S DSS softkeys can only show two at at time afogul 0 464 12-09-2023 05:50 AM
Last Post: afogul
  T48G Top row keypad buttons requiring too much pressure after time Chris708 4 9,820 11-16-2023 01:08 AM
Last Post: here4real
  T46G recovery files evoip 1 1,365 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 2,720 07-28-2023 10:27 PM
Last Post: complex1
  Send different codes on keystroke (enable and disable) Marsl84 0 944 04-21-2023 08:15 PM
Last Post: Marsl84
  T46G Multiple EXT Port amandah 2 1,974 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,130 03-29-2023 05:36 AM
Last Post: matthewchubb

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication