New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Button to predial before a DSS key
Author Message
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 22
Post: #12
RE: Button to predial before a DSS key
(12-29-2012 10:35 PM)telepathinc Wrote:  In the new 2.70 firmware of T28P there is a PREFIX ( of sorts ) in the PICKUP VALUE of a BLF key. In our PBX, we dial *8xxx for a DIRECT CALL PICKUP. The Yealink firmware v70, allows a UNIVERSAL setting in the [ Phone ] tab, [ Features ] sub-tab [ Call Pickup ] section -
Direct Call Pickup = Enabled
Direct Call Pickup Code = *8 ( our setting)

Once we see a BLF key flashing and we want to DIRECT CALL PICKUP the phone, we just PRESS the flashing BLF and we see *8101 ( or whatever ext#) and we have "picked up" the call from ext 101.

THIS IS GREAT - however it still is a SINGLE KEY - SINGLE COMMAND - in this a VERY SMART command *8101 ( but this PREFIX is built into the key - WHEN THE STATE IS "RINGING")

So here is an example of INCREDIBLE GOOD YEALINK FIRMWARE - but it does not solve the "prefix" problem

SO THE QUESTION remains - and it is at the core of the FIRMWARE level - Can we have some sort of PREFIX key, that does NOT execute the command until a SECOND key is pressed such as

Voice Announce Key ( #3 for risabin *90 for me ) and THEN press BLF key 101 and the phone sends #3101 for risabin or *90101 for me

Hi,
Thanks for your information , there is a "Prefix " option in the DSS key, when you press the Prefix button, the value of the Prefix will be displayed in the LCD then you can enter the remain number, maybe we can add this feature like , when you press the Prefix button , and then BLF button, then the phone will dial out the number Prefix value +BLF Value.
I will submit it to the product department .

Best Regards!
Yealink Support Team
01-02-2013 03:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Button to predial before a DSS key - Yealink Support - 01-02-2013 03:49 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Transfer voicecall etc button Armbrust 1 604 07-24-2019 02:42 PM
Last Post: brourk
  Button Tree gwinton 3 1,618 04-13-2018 05:44 AM
Last Post: Lucia_Yealink
  Allow XML browser Type as Option for Voicemail Button necits2015 4 4,458 07-05-2016 03:12 PM
Last Post: Yealink_Michael
  Change behaviour of Headset button Ret 8 12,037 05-19-2016 08:06 AM
Last Post: fatcatpro
  Phone lock by button/application yeacpt 4 6,258 12-23-2015 02:56 PM
Last Post: Yealink_Michael
Star T48G - Status Icon on DSS URL Button cotwild 1 4,748 12-12-2014 04:48 PM
Last Post: James_Yealink
  Multicast Page Button for Programmable Softkey Cloud9phone 4 8,267 08-28-2014 07:21 PM
Last Post: Lucas1
  Allow redefinition of Hold button when in TALK mode briankelly63 1 3,909 07-09-2013 03:27 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication