New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MULTICAST re-register now command ?
Author Message
dlmc Offline
Junior Member
**

Posts: 10
Joined: Oct 2013
Reputation: 0
Post: #1
Question MULTICAST re-register now command ?
What mechanisms are there to instruct a fleet (multiple) handsets to immediately perform a REGISTER operation on all configured lines ?

Specifically even when the phone thinks it is registered already and has maybe upto 1 hour left on the expiry timer.


Looking a list of suggestions and pointers to the page number in relevant documentation.

Maybe we can hit the HTTP web interface of all handsets ?? but what do we send ??

Maybe we can send a MULTICAST (or BROADCAST) message to the LAN ??

See also my other wishlist posting (requesting that if a user holds down a line key, there is an option to force an unregister and then re-register operation). At the moment one of the multifunction buttons has nothing set, there is:

F1: Back
F2: <empty>
F3: Switch
F4: Save

Even when pressing SAVE if the phone is already registered and no setting was changed, it does not attempt to perform an immediate REGISTER.

The only way around is to power cycle the phone!
02-20-2014 11:12 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
MULTICAST re-register now command ? - dlmc - 02-20-2014 11:12 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Register to the multi tenant PBX (where is right forum to post?) steve.newton 0 23 12-02-2019 11:00 AM
Last Post: steve.newton
  Yealink Phone to Send Private IP Address on Register Ari 4 420 10-23-2019 10:04 PM
Last Post: Ari
  Format of Multicast RTP stream srcurtis 6 8,952 04-19-2019 02:25 AM
Last Post: Helia_Dar
  Download Local Directory by Command Line Tools yealy 2 1,105 11-16-2018 07:19 AM
Last Post: yealy
  Multicast to PC through PC port agle 1 2,041 09-30-2017 07:45 AM
Last Post: Samuel_Yealink
  Multicast to PC through PC port Dennis_1 1 2,003 09-27-2017 01:59 AM
Last Post: Samuel_Yealink
  get status phone in command line Fixit 2 3,169 06-19-2017 06:06 PM
Last Post: Fraukas2
  Multicast paging tone sunstatetech 3 3,695 05-04-2017 07:23 PM
Last Post: GIWM
  T28P re-register remotely LeeDraper 1 2,377 05-04-2017 11:55 AM
Last Post: Kevin_Yealink
  Analog input to multicast paging rlsabin 4 7,267 11-03-2016 12:46 AM
Last Post: kahaen

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication