Intercom Barge

[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Thread Rating:

0 Votes - 0 Average
1
2
3
4
5

Threaded Mode \| Linear Mode Intercom Barge
Author	Message

Voore

Junior Member

Posts: 17

Joined: Nov 2012

Reputation: 1

Post: #5

RE: Intercom Barge

(10-23-2013 10:35 PM)stefan@nunetworx.com Wrote:
(10-18-2013 01:46 AM)Niki Wrote: I tested on 2.70.150 and its not fixed....
Hey Niki,
I was just troubleshooting and scratching my head today as to why our multicast pages kept interrupting people on calls.

It took me a while to find there's a second group of options that controls the multicast barge.
On the T28 it's under Contacts --> Multicast Paging.
The options are "Paging Barge" and "Paging Priority Active".
Setting both to disabled fixed my issue.

In a provisioning template it would be:
multicast.receive_priority.enable = 0
multicast.receive_priority.priority = 0

Don't know if you had the same problem but hopefully it'll help someone.

Thanks stefan, but this didn't help my issue as i'm talking from regular intercom not from multicast, hope it will help someone else...

10-23-2013 10:43 PM

« Next Oldest | Next Newest »

Messages In This Thread

Intercom Barge - Niki - 12-06-2012, 04:49 AM

RE: Intercom Barge - Flora_Yealink - 12-08-2012, 12:02 PM

RE: Intercom Barge - Niki - 10-18-2013, 01:46 AM

RE: Intercom Barge - stefan@nunetworx.com - 10-23-2013, 10:35 PM

RE: Intercom Barge - Niki - 10-23-2013 10:43 PM

RE: Intercom Barge - mayya - 10-28-2013, 07:31 PM

RE: Intercom Barge - Yealink Support - 10-29-2013, 10:31 AM

RE: Intercom Barge - Niki - 10-29-2013, 10:40 PM

RE: Intercom Barge - Yealink Support - 10-31-2013, 03:37 PM

RE: Intercom Barge - braymond - 11-12-2013, 09:56 AM

RE: Intercom Barge - Yealink Support - 11-12-2013, 10:11 AM

RE: Intercom Barge - Yealink Support - 11-12-2013, 10:44 AM

RE: Intercom Barge - braymond - 11-14-2013, 09:00 AM

RE: Intercom Barge - Yealink Support - 11-14-2013, 09:24 AM

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Low intercom tone volume	haukzinn	0	3,775	07-18-2020 08:27 PM Last Post: haukzinn
	T29G v81 During call set up, intercom or broadcast page will barge in and cancel call	csmith	2	10,344	06-20-2017 06:47 PM Last Post: csmith
	T48G Phones not disconnecting on Auto Answer for Intercom	telone	3	12,204	05-22-2015 06:20 PM Last Post: Flora_Yealink
	Intercom auto answer	istech	15	53,351	02-01-2015 01:55 AM Last Post: bonzer1
	Yealink T28P intercom not working properly	greyhorne	1	8,921	01-09-2015 03:43 PM Last Post: Yealink_Peter
	Intercom	elementpbx	3	12,459	11-19-2014 08:29 AM Last Post: elementpbx
	Incoming intercom call while in another call shows up as missed call	raarts	0	5,857	09-13-2014 03:25 AM Last Post: raarts
	Intercom mute auto un-mute when receiver picked up	tsukraw	4	16,450	06-06-2014 09:47 PM Last Post: engine411
	Auto Answer for Intercom call ONLY	Bryan Nash	1	9,519	03-11-2014 01:04 PM Last Post: CWR
	Intercom & call transfers	mitch	6	24,297	02-27-2014 02:23 PM Last Post: Yealink Support

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Log in