Manually held call is transfered if BLF key is pressed

[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Thread Rating:

0 Votes - 0 Average
1
2
3
4
5

Threaded Mode \| Linear Mode Manually held call is transfered if BLF key is pressed
Author	Message

BrettB Offline

Junior Member

Posts: 14

Joined: Jan 2013

Reputation: 0

Post: #10

RE: Manually held call is transfered if BLF key is pressed

(03-07-2014 09:16 PM)braymond Wrote: If I put a call on hold, it shouldn't be considered "active" but rather "held" and therefore the transfer mode should not be triggered.

I completely agree. A call on hold should not be transferred when I just press a BLF key. When the phone is "idle" (whether a call is on hold or not), and I press a BLF key, it should initiate a new call to the BLF extension.

03-13-2014 11:34 AM

« Next Oldest | Next Newest »

Messages In This Thread

Manually held call is transfered if BLF key is pressed - braymond - 02-11-2014, 05:21 AM

RE: Manually held call is transfered if BLF key is pressed - braymond - 02-12-2014, 09:53 AM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 02-17-2014, 08:40 PM

RE: Manually held call is transfered if BLF key is pressed - braymond - 02-25-2014, 01:06 AM

RE: Manually held call is transfered if BLF key is pressed - Netpro25 - 03-01-2014, 04:36 AM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 03-04-2014, 04:29 PM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 03-07-2014, 04:25 PM

RE: Manually held call is transfered if BLF key is pressed - braymond - 03-07-2014, 09:16 PM

RE: Manually held call is transfered if BLF key is pressed - BrettB - 03-13-2014 11:34 AM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 03-11-2014, 06:38 PM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 03-13-2014, 04:03 PM

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM	joao.schlemm	8	25,138	12-27-2023 06:49 PM Last Post: nolto
	T28P foward call doesn´t work with 2.73.0.50	Tato	4	11,675	09-14-2020 03:49 PM Last Post: complex1
	Yealink T21P E2 displays VIA and FROM headers on incoming call	DmitryTsyganov	1	7,130	07-12-2018 07:28 PM Last Post: johnkiniston
	T22p does not get IP, and does not access the web interface even by manually config	jason.luka	5	13,227	04-18-2018 01:29 AM Last Post: anonymous1712222627012
	T21P-E2 sends a CANCEL to put a call in hold	Diego Juan	0	4,942	03-23-2018 02:52 PM Last Post: Diego Juan
	Call Queue not working with the Grandstream UCM6202	ttran	8	22,321	03-04-2018 06:42 PM Last Post: Adnanka
	T29G DSSKey functionality alternative number call	AresK	4	12,336	12-13-2017 06:56 AM Last Post: Evan_Yealink
	When I call outside, there's no call waiting tone	highlander	3	10,386	11-15-2017 04:04 PM Last Post: highlander
	Call Forward on T21P E2 not working	gradash	8	22,732	05-23-2017 09:44 PM Last Post: jolouis
	Call Queue not working with the Grandstream UCM6202	ttran	0	5,234	05-04-2017 05:48 PM Last Post: ttran

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Log in