Manually held call is transfered if BLF key is pressed

[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Thread Rating:

0 Votes - 0 Average
1
2
3
4
5

Threaded Mode \| Linear Mode Manually held call is transfered if BLF key is pressed
Author	Message

Yealink Support Offline

Administrator

Posts: 2,683

Joined: Dec 2012

Reputation: 25

Post: #3

RE: Manually held call is transfered if BLF key is pressed

Hi braymond，

Can you supply me syslog level 6, and pcap?
1. Before you export the syslog, please set syslog level as 6, and reboot the phone
2. then enter the webpage, find the pcap feature, click Start ,and reproduce the issue, then click Stop, and export the pcap, syslog, config.bin to us.
(About where to export these files, please refer to attached screenshots.)
These three files are very important to us, hope you can kindly understand.

Attached File(s) Thumbnail(s)

02-17-2014 08:40 PM

« Next Oldest | Next Newest »

Messages In This Thread

Manually held call is transfered if BLF key is pressed - braymond - 02-11-2014, 05:21 AM

RE: Manually held call is transfered if BLF key is pressed - braymond - 02-12-2014, 09:53 AM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 02-17-2014 08:40 PM

RE: Manually held call is transfered if BLF key is pressed - braymond - 02-25-2014, 01:06 AM

RE: Manually held call is transfered if BLF key is pressed - Netpro25 - 03-01-2014, 04:36 AM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 03-04-2014, 04:29 PM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 03-07-2014, 04:25 PM

RE: Manually held call is transfered if BLF key is pressed - braymond - 03-07-2014, 09:16 PM

RE: Manually held call is transfered if BLF key is pressed - BrettB - 03-13-2014, 11:34 AM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 03-11-2014, 06:38 PM

RE: Manually held call is transfered if BLF key is pressed - Yealink Support - 03-13-2014, 04:03 PM

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM	joao.schlemm	8	25,169	12-27-2023 06:49 PM Last Post: nolto
	T28P foward call doesn´t work with 2.73.0.50	Tato	4	11,683	09-14-2020 03:49 PM Last Post: complex1
	Yealink T21P E2 displays VIA and FROM headers on incoming call	DmitryTsyganov	1	7,138	07-12-2018 07:28 PM Last Post: johnkiniston
	T22p does not get IP, and does not access the web interface even by manually config	jason.luka	5	13,231	04-18-2018 01:29 AM Last Post: anonymous1712222627012
	T21P-E2 sends a CANCEL to put a call in hold	Diego Juan	0	4,942	03-23-2018 02:52 PM Last Post: Diego Juan
	Call Queue not working with the Grandstream UCM6202	ttran	8	22,325	03-04-2018 06:42 PM Last Post: Adnanka
	T29G DSSKey functionality alternative number call	AresK	4	12,341	12-13-2017 06:56 AM Last Post: Evan_Yealink
	When I call outside, there's no call waiting tone	highlander	3	10,391	11-15-2017 04:04 PM Last Post: highlander
	Call Forward on T21P E2 not working	gradash	8	22,735	05-23-2017 09:44 PM Last Post: jolouis
	Call Queue not working with the Grandstream UCM6202	ttran	0	5,236	05-04-2017 05:48 PM Last Post: ttran

Forum Jump:

User(s) browsing this thread:

Log in