[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Asterisk blind transfer using T46 transfer button
Author Message
Davedog Offline
Junior Member
**

Posts: 8
Joined: Jul 2014
Reputation: 0
Post: #3
RE: Asterisk blind transfer using T46 transfer button
I have run into this issue also, was there ever a resolution?

If I change the custom softkey type in the 'transfer to' state from transfer to send this seems to solve the issue, but I can't set this via config templates. The templates that are downloadable seem quite dated.

Are there updated templates available?

I'm running firmware 28.80.0.95

(12-25-2015 05:06 AM)Yealink_Karl Wrote:  Maybe something difference of the transfer between Yealink phone and Asterisk server.
Please help us to get a pcap trace/ level 6 syslog/ config.bin file. We can check something from them.
Please set the syslog level to 6->reboot the phone(necessary)->click the start->repeat the issue->click the stop->export the PCAP->export the syslog file->export the configuration file.
You can get more info from:
http://forum.yealink.com/forum/showthread.php?tid=1319 

Karl, I followed your instructions, see attached.

PCAP with 'transfer to' softkey transfer changed to send


Attached File(s)
.pcap  28.80.0.95_17_31_55.pcap (Size: 185.12 KB / Downloads: 3)
.pcap  28.80.0.95_17_37_12.pcap (Size: 207.59 KB / Downloads: 1)
(This post was last modified: 03-10-2016 09:24 AM by Davedog.)
03-10-2016 09:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Asterisk blind transfer using T46 transfer button - Davedog - 03-10-2016 09:02 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Smile T43U handset only works when headset button is green jaydub 2 274 03-21-2024 07:13 AM
Last Post: jaydub
  Provision Button back to blank glennbtn 0 406 01-10-2024 06:34 PM
Last Post: glennbtn
  Remove transfer dialog on T46S bsnipes 0 515 12-05-2023 04:44 AM
Last Post: bsnipes
  Disable X button to reject calls hercross 0 771 07-07-2023 04:01 PM
Last Post: hercross
  Transfer error: Not Emergency Call tredd1982 0 1,903 10-28-2022 03:15 AM
Last Post: tredd1982
  T48U 'transfer.dsskey_deal_type' issue srcenturic 0 1,957 06-27-2022 02:52 PM
Last Post: srcenturic
  cannot transfer to Park line button srcenturic 0 1,779 06-10-2022 01:41 AM
Last Post: srcenturic
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 7,929 05-12-2022 05:41 PM
Last Post: rtfm2022
  T46 - Program Message Button for a Help call? harrys 0 2,519 03-31-2022 11:08 PM
Last Post: harrys
  T48U - how to remove the DND button from main screen ckatz@bluip.com 1 4,416 11-10-2021 12:05 AM
Last Post: sbrammer

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication