T46G Firmware 28.80.0.60 disables the intercom auto-answer function

[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Thread Rating:

0 Votes - 0 Average
1
2
3
4
5

Threaded Mode \| Linear Mode T46G Firmware 28.80.0.60 disables the intercom auto-answer function
Author	Message

Lucia_Yealink Offline

Super Moderator

Posts: 467

Joined: Aug 2016

Reputation: 5

Post: #11

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function

(01-20-2016 05:05 AM)dew3flr Wrote:
(12-02-2015 08:10 AM)KenDoerksen Wrote: I have tested on 4 different phones now all hardware version 28.2.0.128.0.0.0. When using the intercom between the phones on firmware version 28.80.0.60 the phones just ring. I downgraded the phones to firmware version 28.73.0.50 and they all auto-answer the incoming intercom as expected again.

Any time table for this to get fixed?

where did you set the intercom auto-answer in 28.73.0.50 ? Only see general auto answer - which auto answers all calls. No choices in Features/Intercom ?

For the intercom, please refer to the picture below to configure it:

07-28-2017 06:04 AM

« Next Oldest | Next Newest »

Messages In This Thread

T46G Firmware 28.80.0.60 disables the intercom auto-answer function - KenDoerksen - 12-02-2015, 08:10 AM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - Karl_Yealink - 12-02-2015, 05:05 PM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - KenDoerksen - 12-03-2015, 08:26 AM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - Karl_Yealink - 12-03-2015, 04:15 PM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - KenDoerksen - 12-04-2015, 01:53 AM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - c.holloway - 12-07-2015, 09:31 PM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - Karl_Yealink - 12-07-2015, 11:55 PM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - c.holloway - 12-08-2015, 02:48 AM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - dew3flr - 01-20-2016, 05:05 AM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - Lucia_Yealink - 07-28-2017 06:04 AM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - Bryan - 01-21-2016, 11:35 PM

RE: T46G Firmware 28.80.0.60 disables the intercom auto-answer function - Lucia_Yealink - 07-28-2017, 06:05 AM

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	T41S FIRMWARE 66.9.0.80 vers 66.86.0.5	DANJEAN	1	393	08-23-2023 01:00 AM Last Post: complex1
	Yealink SIP-T40P Firmware	UnitedTech_Support	1	1,076	05-05-2023 08:07 PM Last Post: complex1
	T46G Multiple EXT Port	amandah	2	1,156	04-04-2023 01:06 AM Last Post: Yisroel_MongoTEL
	T46G LED blinks when screen is off	W	4	6,927	03-29-2023 05:36 AM Last Post: matthewchubb
	T48U Custom Firmware Upgrade to Official	Friendly	0	1,002	03-29-2023 01:20 AM Last Post: Friendly
	T46G/S Multicast on PC Port Issue	MiKeDaDoC	5	10,276	01-02-2023 01:30 AM Last Post: kw160008
	Yealink T41S firmware	kosif	0	1,222	12-19-2022 08:52 AM Last Post: kosif
	T46G call completed elsewhere	zimbocz	3	8,858	10-28-2022 03:28 AM Last Post: tredd1982
	T42S unable to update firmware	brianstoiber	6	5,025	09-30-2022 05:31 PM Last Post: complex1
	T46G SSL 2 & 3 Vulnerability	russavd	0	1,011	09-24-2022 05:07 AM Last Post: russavd

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Log in