[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Basestation dropping offline, serving HTTP 500 errors after fw upgrade
Author Message
adsweet76 Offline
Junior Member
**

Posts: 6
Joined: Nov 2015
Reputation: 0
Post: #1
Basestation dropping offline, serving HTTP 500 errors after fw upgrade
Hi everyone

I have a W52P basestation with two w52h handsets. They were purchased in the UK in August 2014 and have worked fine until about 3 weeks ago. The basestation firmware was upgraded to 25.50.0.20 when first purchased and the handsets were upgraded to 26.50.0.20 immediately afterwards.

I went on holiday and when I came back around 3 weeks ago, I noticed my W52H handsets weren't ringing when a call came through (I also have a Cisco SPA303 on a different account and the server sends incoming calls to both). I checked the W52H handsets to find they were "searching for base" and the W52P basestation wasn't responding over the network.

I unplugged and then reconnected the power to the basestation, it came back online and the handsets reconnected. A day or so later the same thing happened again. The handsets would revert to searching for base and the basestation would be inaccessible on the network. I have since done this unplug/reconnect power thing on the basestation numerous times and it fixes the issue temporarily.

I noticed that there's an upgraded firmware here:

http://www.yealink.co.uk/Firmware

So I upgraded the basestation earlier today. Since then, when attempting to connect to the web GUI, I get the following message:

"500 - Internal Server Error"

Just connecting to the IP address (with no path), I get redirected to /servlet?p=login&q=loginForm&jumpto=status which after exactly 10 seconds returns "500 - Internal Server Error". Accessing that servlet URL directly returns the same error.

I performed a basestation reset using the handset and the problem persists. I also performed a factory reset by holding down the paging key, pulling the power and reconnecting it but I am still getting the internal server error.

Base FW: 25.73.23.3 (upgraded today from 25.50.0.20)
Base hardware: Can't check without access to GUI
Handset hardware: 26.0.0.7
Handset FW: 26.50.0.20

Can anyone please advise?

Since it is over a year old, is it suitable for return under warranty? http://www.yealink.co.uk/Warranty
11-12-2015 10:23 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Basestation dropping offline, serving HTTP 500 errors after fw upgrade - adsweet76 - 11-12-2015 10:23 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P Firmware upgrade aunijaffer@gmail.com 5 12,343 09-07-2021 11:42 PM
Last Post: complex1
  Yealink W52P: Not able to upgrade handset through web interface Igor_ 3 14,351 11-02-2017 04:09 PM
Last Post: complex1
  Yealink W52P: Not able to upgrade handset through web interface Igor_ 0 5,032 11-02-2017 12:45 PM
Last Post: Igor_
  w52p handset. Firmware keeps reverting to old version after upgrade. farrago 0 5,494 07-23-2017 07:00 PM
Last Post: farrago
  Firmware won't upgrade to handset Jeroen 3 12,515 06-06-2017 04:58 PM
Last Post: complex1
  Calls dropping at 37 Seconds norbi 9 26,939 11-28-2016 01:00 AM
Last Post: Travis_Yealink
  Handset will not upgrade markm 1 6,469 09-08-2016 06:38 PM
Last Post: complex1
Question W52P/H upgrade handset doesn't work. tps 2 9,200 09-25-2014 08:49 PM
Last Post: complex1
  Firmware Upgrade + No Missed Calls to be found duende316 7 21,290 09-16-2014 04:52 AM
Last Post: complex1
  Firmware upgrade problem on W52P base Jocelyn 7 21,581 06-23-2014 04:08 AM
Last Post: Abe1048

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication