T48G - Call Transfer Problem

[Futureweb]

Hello,

configuring our 3CX + Yealink PBX right now - trying to realize Transfer Behaviour like it was on our old analog PBX - but just can't figure it out how to do it right ... hope you can help me on this!

Wanted Behaviour:
- active Phone Call on Phone 1
- I press the BLF Button for Phone 2
- Call should go on HOLD and I can speak with Phone 2 (Attended Transfer)
- Now when I hang up - the call should get transfered to Phone 2

If Phone 1 hangs up before Phone 2 picks up the call - a Blind Transfer should be made.

Configuration right now:
- Semi-Attended Transfer Disabled
- Blind Transfer On Hook Enabled
- Attended Transfer on Hook Disabled
- Transfer on Conference Hang up Enabled
- Transfer Mode Via Dsskey Attended Transfer

Thank you, bye from Austria
Andreas Schnederle-Wagner

---

alright - I guess I got it working ...

Configuration right now:
- Semi-Attended Transfer Disabled
- Blind Transfer On Hook Enabled
- Attended Transfer on Hook Enabled
- Transfer on Conference Hang up Disabled
- Transfer Mode Via Dsskey Attended Transfer

Only one thing is puzzling me ... when I transfer from Phone 1 to Phone 2 ... Phone 2 shows me a missed call when a Blind Transfer (on Hook) was made ... ?
Possible to get rid of this too?

Thx
Andreas