New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46 Codec Selection - Garbled Voice on Asterisk
Author Message
GeorgSchwarz Offline
Junior Member
**

Posts: 28
Joined: May 2013
Reputation: 0
Post: #10
SOLVED: T46 Codec Selection - Garbled Voice on Asterisk
Sorry, if I caused a misunderstanduing.

The problem was in fact our Autoprovisioning, and we did not see that some settings were still obtained from the server when we did a manual config after a firmware reset...

In our version that was initially built for v71 releases of the T2x-series whe had the codec selection like this (which works perfectly well for the T2x series)

account.1.codec.1.payload_type = PCMA
account.1.codec.2.payload_type = G722
account.1.codec.1.enable = 1
account.1.codec.2.enable = 1
account.1.codec.3.enable = 0
[...]

Obviously when I do that the RTPMap value does not change along with the allowed codecs.
I have now set the RTP-Map values according to your post, and my AutoProv-File now looks like this:

account.1.codec.1.payload_type = PCMA
account.1.codec.1.rtpmap = 8
account.1.codec.1.enable = 1

account.1.codec.2.payload_type = GSM
account.1.codec.2.rtpmap = 3
account.1.codec.2.enable = 1

account.1.codec.3.enable = 0
[...]


And now things are working like a charm

Thanks for your excellent support,
best,
George
(This post was last modified: 01-07-2014 06:00 AM by GeorgSchwarz.)
01-07-2014 05:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
SOLVED: T46 Codec Selection - Garbled Voice on Asterisk - GeorgSchwarz - 01-07-2014 05:31 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  DTMF for carrier pre-selection rpereira 2 1,314 09-22-2018 06:58 AM
Last Post: rpereira
  Codec priority list Philippe_ 1 1,356 01-11-2018 03:11 PM
Last Post: complex1
  Call Parking - Yealink Phone - Asterisk 11 vs 13 Velocita Technology 1 1,756 12-26-2017 06:06 AM
Last Post: Lucia_Yealink
  Unable to get OPUS codec to match asterisk 13.13.1 scully 3 3,497 01-21-2017 03:29 AM
Last Post: Jensen_Yealink
  401/403 authorization error on remote asterisk from T46G over VPN hexhex 1 3,664 07-06-2016 02:10 AM
Last Post: hexhex
  Voice Mail Setup KYPhones 2 4,921 11-03-2015 03:30 AM
Last Post: KYPhones
  Register Failed T21 in PBX Asterisk ahidalgo 1 4,689 10-30-2015 02:15 AM
Last Post: James_Yealink
  Voice mail Fangas 3 4,162 05-18-2015 04:30 AM
Last Post: ModCraig
  Voice Mail Key ITinvestor 1 3,100 09-23-2014 04:49 PM
Last Post: Yealink Support
  Can't select GSM codec fetoa 1 2,746 06-27-2014 04:48 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication